this site^ will show you a how
Drain the water from the cooling system. Remove the radiator hose from the thermostat housing. Remove the thermostat housing retaining bolts. Reverse the process to install the new thermostat.
Yes, the car was exactly the sam for those years. Usually, the car parts comply until they change the body style completley. Or, buy a universal automatic window regulator. Patrick
The thermostat for a 6 cylinder Ford pickup is in the top radiator hose inlet. The hose and inlet need to be removed to install the thermostat..
electrical problem,ford bantam 1600 1997
how do you change a thermostat for a 1997 Ford Contour
Yes a bad thermostat would cause overheating in any car. A thermostat regulates the temperature.
Check the thermostat, also there could be a heater core issue...
where is the ecu located on a 97 ford probe
Remove the 2 bolts at the thermostat housing. The upper hose goes to the thermostat housing.
THERE WAS NO FORD PROBE IN MODEL YEAR 1985
how to change a thermostat on a 2004 ford expedition
You have to remove the inside door panel then you can see the holding assembly
Takes about 5 minutes if it is a 2.5L V-6.
The thermostat is located on the right side of the engine looking in, in between the intake manifold and the air filter box, underneath the wiring. This is in a 1994 Ford Probe GT 6 cylinder
R-134a
where is the thermostat on a 1.4 1997 ford fiesta zetec engine