Here is a web site that I saw that will help you on removing and replacing the starter on a 1999 Toyota 4Runner: http://www.4crawler.com/4x4/CheapTricks/Starter.shtml
You have to remove the cross over section of the exhaust
disconnect the battery, pull the primary cover and remove the jack shaft, You will need a 1/4 Allen socket to get to the starter bolts. remove battery pos cable from starter and remove
Should be at the lower rear end of the engine Remove the - battery cableRaise and support vehicleRemove wires from starter solenoid at top of starterRemove starter mounting boltsRemove starter
Look on the lower end of the engine Should have 2 mounting bolts
If its anything like a 93 all you do is disconnect the battery, disconnect and mark for reinstallation the wires at the starter. Remove the two bolts that hold it, and drop it out. Make sure to hold on to any shims that might be there.
The starter on a 1998 Toyota 4runner is held located on the transmission housing. The starter is held on by 2 bolts which mount it directly it the engine. Remove the two bolts to replace the starter.
Remove the nuts! They are on the lower metal frame the seat
Remove it and bring to an auto parts store that is equipped to test it for continuity, amperage draw, drag, etc.
Disconect the - battery cable Raise and support vehicle Remove wiring at the top of starter Remove mounting bolts Remove starter
Is a rear end1998 Toyota 4runner will fit in a2002 Toyota 4runner/
Auto trader.com is a great place to look for used vehicles. I bet they have tons of Toyota 4runner for sell.
5.5
The 1998 Toyota 4runner OBD 2 port is under driver side dash left of steering column
could you tell me what is the spark plug gap for toyota 4 runner 1998
where is the throttle position sensor on a 1998 Toyota 4runner???? can any one help???
take it and the headlights to a dealer
32, to 35psi