Open up the hood, and go in behind the fixture where the light is located. Sometimes there is an access panel on top. Open it and reach down inside and grab the bulb's socket. Twist the socket a quarter turn counter clockwise, and pull out the socket. Grab the bulb, and pull it straight out. To replace the new bulb, never touch it with your bare fingers, as this will greatly shorten the bulb's life, if it even work's at all. Use a tissue or something else in that order to handle the new bulb. Push the new bulb into the socket, put the socket back into the housing, and twist a quarter turn clockwise to secure the socket into the fixture.
You might try this website. http://www.toyotaownersonline.com/parts-service/diy.html
If you mean replace the headlight bulb they can be removed and replaced by opening the hood. Look at the back of the headlight - there are two separate bulbs for high and low beam on each side. There is a rubber cover on the back of the headlamp for each bulb that needs to be removed. If you mean replacing the entire headlight assembly then you need to remove the front grill and the front bumper cover.
At 100,000 miles.
Open trunk and remove screws that secure light assembly to car. Pull assembly straight back to remove from car. Remove the dead light and replace with proper new light. Install in reverse order of removal.
google ...toyota-autobestanswer. a free file there.
On a 2012 toyota Highlander, How do you replace tail light Assembly
To replace the headlight on a 1985 Toyota Tercel, first, open the hood and locate the headlight assembly. Remove the retaining screws or clips securing the headlight, then gently pull the assembly forward. Disconnect the electrical connector from the back of the headlight bulb, replace the bulb with a new one, and reconnect the electrical connector. Finally, reassemble the headlight assembly and secure it back in place with the screws or clips.
Here is a hint, ask a dealer!
To replace the headlight on a Toyota Solara, first, open the hood and locate the headlight assembly. Disconnect the electrical connector from the back of the headlight and remove the retaining clips or screws holding the assembly in place. Carefully pull out the old headlight bulb, insert the new bulb without touching the glass, and reattach the connector. Finally, secure the headlight assembly back in place and close the hood.
Open the hood of the engine compartment to your 1994 Toyota Corolla. Remove the wiring harness from the headlight. Remove the headlight retraining bolts from the headlight assembly. Reverse the process to install the new headlight.
To replace the right taillight assembly on a 2012 Toyota Highlander, first, open the rear hatch and locate the access panel on the inside of the cargo area. Remove the panel to expose the taillight assembly screws, then unscrew and disconnect the wiring harness from the old taillight. Replace it with the new assembly by reconnecting the wiring harness and securing it with the screws, then replace the access panel. Finally, test the new taillight to ensure it’s functioning properly.
How to replace a headlight on a toyota hiace van
To replace the headlight assembly on a 2003 Toyota RAV4, first, open the hood and remove the screws or bolts securing the headlight assembly. Disconnect the electrical connector and carefully pull the assembly out. Install the new headlight assembly by reversing the steps: connect the electrical plug, secure it with screws or bolts, and ensure it's aligned properly. Finally, test the headlights to ensure they function correctly.
Question isn't clear. Are you asking how do you replace the bulb -OR- how to remove the entire lens assembly?
To replace the brake light bulb on a Toyota Highlander, first, open the rear hatch and locate the brake light assembly. Remove the screws or clips securing the assembly, then gently pull it out. Disconnect the wiring harness and remove the old bulb by twisting it counterclockwise. Insert the new bulb, reconnect the harness, and reassemble the brake light assembly.
how to 2001 highlander grille
To change the headlight on a 1989 Toyota SR5 truck, first, open the hood and locate the headlight assembly. Disconnect the electrical connector from the back of the headlight and remove the retaining clips or screws holding the assembly in place. Carefully pull out the old headlight bulb and replace it with a new one, ensuring it is securely seated. Reassemble the headlight assembly, reconnect the electrical connector, and test the new headlight to ensure it works properly.