Check to see if any of the codes came back. Typically, if something is wrong that caused a code, it won't go away until the problem is resolved. Connect a code scanner to see what it can detect.
Sounds like something with alarm discharged battery.
Drowning Mona was created on 2000-03-03.
Robert Mills - architect - died on 1855-03-03.
One 8.1Balleny Islands region 1998/03/25 03:12
Someone answer this please. I have an 03 sierra and don't know if I have a problem or if it's just time for maintenance.
there is no reset on the brake pads, you can check your brake pads sensors they will make the light come on
To reset the service spanner indicator on a 2003 Vauxhall Vectra 2.0 DTI, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal fully three times within five seconds. Then turn off the ignition. Upon restarting the vehicle, the service spanner light should be reset.
Which lights are you trying to turn off? Check Engine, Service, ABS......
by using obd2 scanner from your local garage
If you are referring to the Malfunction Indicator Light (yellow engine shaped light) the simplest way is to disconnect the negative battery post for 20 minutes or so. If the light comes on again during vehicle operation then the cause of the fault has not been corrected.
Assuming you want to clear/reset the check engine light, if you have successfully made repairs to correct what was the cause of the check engine light to go on the light will clear itself after a few drive cycles.
== == == == == == == == some time you can take the battery loose an this will reset it.keep it off for about twenty seconds.
had same problem w/ my "03. go to dealer and there was an update for it and he "flashed" the computer with their handscanner and it updated the problem from GM w/software fix. light was gone
Check out the related link for advice on how to reset the security code on a Nokia C2-03.
reset switch by Honda or acura part number 07paz-oo10100
disconnect the negative battery cable for 30 seconds