answersLogoWhite

0

Desiccants are particularly effective for water removal. Heat above 212°F usually does the trick, too.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Art & Architecture

Do you need to sand between coats of water based gloss?

Great question! As it is not a requirement to sand between coats when painting, to ensure the best possible finish and leave your customer happy, I would most definitely recommend it. A light sand using 220 sand paper will give you good adhesion on your top coat of gloss as well as knock down any dust or debris that has made its way into your finish. Remember only a light sanding is needed, so don't go making a mess, and always make sure you use a damp cloth to wipe up all of the sanding dust. Good luck, and Happy Painting.


How do you remove old paint from a wooden fence What is the best way to sand it and what kind of sand paper should be used?

You can use sand to remove the paint of wood with medium-grain sandpaper.Here be careful you are not to scratch the wood. Also at paint store you will get various paint remover of fence.but most of them are harmful to use. So Better that you refer any fence experts like TotalFence Inc,who will guide you in proper way to maintain fence paint.


How do you clean glue marks from polycarbonate?

The only way is to sand it off using succesively smaller grits. I would start with 220 Wet 'n Dry and soapy water, then get down to 400, 600 and finally 1000, keeping lots of soapy water on the part. -I've done polycarbonate headlight covers this way -it works, but is a lot of work.


Do you need to sand stairs when painting over oak?

u probably should, either way would work but to acheive the best look i would go ahead and sand 'em


What is the best way to remove wood stain residue from newly stripped furniture?

If you have stripped your furniture and there is still too much stain showing on the surface you should first rough sand the project to remove any un-wanted blemishes and roughness then use household bleach followed by light sanding. Remember at this point the more you sand the more the old stain will be exposed.

Related Questions

How does a sand scuulpture keep from falling apart?

A sand sculpture is typically mixed with water to create a damp, compact consistency that helps the sand stick together. Additionally, sculptors may use certain tools to carve and shape the sand in a way that provides structural support to the sculpture. Spraying a water mist on the sculpture periodically can also help maintain its shape and prevent it from falling apart.


Is there another way of separating the sand from water aside from decantation what is it?

Another way of separating sand and water aside from decantation is filtration.


If you have fine sand particles in water what is the best mechanical way to get rid of the sand?

The best mechanical way to remove fine sand particles from water is through filtration. Using a fine mesh or filter, the water can pass through while the sand particles are trapped, allowing you to separate the sand from the water. This method is effective in cleaning the water by physically removing the sand particles.


Is it true that sand sinks in water because water is more dense than sand?

No. Sand sinks in water because sand is more dense than water, not the other way around.


How do you get dry sand and water from wet sand?

One way to get dry sand and water from wet sand is to let the wet sand dry in the sun. The water will evaporate, leaving behind dry sand. You can also use a strainer or filter to separate the water from the wet sand.


Which falling sand game do you have a stickman on?

men on sand .com i think any way


How do you prove that sand has salt particles?

One way to prove that sand has salt particles is by performing a simple experiment. You can dissolve the sand in water and then evaporate the water, leaving behind any salt particles present in the sand. Another method is to analyze the composition of the sand using chemical testing, which can detect the presence of salt particles.


Why does sand sink in water?

Sand and water both have weight and both have volume. A cup (volume) of sand weighs more than an equal volume of water. So the sand pushes the water out of the way and sinks. A cup of wood chips weighs less than an equal volume of water. So the water pushes the wood chips out of the way and they float. Try it and see.


How we separate sand and water?

One way to separate sand and water is through a process called filtration. You can pour the sand and water mixture through a filter that will allow the water to pass through while trapping the sand. Another method is to let the mixture sit until the sand settles at the bottom, then carefully pour off the water.


How do you put out a pan fire?

The best way is to use sand or water.


Where are frog eggs kept?

You do not need to take care of frog eggs in any way.


What is the best way to clean the outside of an aluminum briefcase?

The best way to clean an aluminum briefcase from any spots, spills, or stains is by using a damp wash cloth or paper towel that's soaked in water and Ivory soap.