The reason the key is stuck is because the shifter linkage is out of alignment. To remove the key just remove the black plastic piece the surrounds the ignition key , use a finger nail file or something similar , it pops out pretty easy , then you will see a little "Red" colored button , push the button in , you now will be able to push the black button in and the key can now be removed. I know I'm a genius !
When this happens after i park, I Just start the car And drive it for atleast a minute. Park shift slowley, Apply the break And put in park. And then the key comes out.
To remove a key that is stuck in the ignition on a Peugeot 406 HDI, make sure that the car is in park. Then try to remove the key. If this does not work, spray the ignition mechanism with WD-40 after pulling out the key as far as possible. Then work the key in and out until it comes out.
is it a ford? push the key in further and then turn it
The tumblers in the key cylinder have most likely become stuck in the wrong position and you will have to replace the ignition key cylinder.
Replace your ignition lock assembly.
With the key stuck in the accessory position the steering wheel is locked and the gearshift is locked in the park position. Perhaps you should consider having a locksmith change the key cylinder where it is, or else have it towed to the garage.
how to remove key stuck in ignition switch in Chevy colbalt
Well, it sounds like the chip that is in your key may have broke or got stuck on a part of the ignition. I had that problem. This happened not long after I had had to have the ignition replaced?!?
yes.
There should be a lock on the ignition a push button that you push and turn to remove the key
A guy has stuck his key in your ignition
To remove a key that is stuck in the ignition on a Peugeot 406 HDI, make sure that the car is in park. Then try to remove the key. If this does not work, spray the ignition mechanism with WD-40 after pulling out the key as far as possible. Then work the key in and out until it comes out.
The 1980 Suzuki key code switch is located near the ignition switch. This is the common location for most older models.
is it a ford? push the key in further and then turn it
Use the opportunity to replace the ignition. Key needs to be in On position for removal.
get a new lock
Put it in reverse.
You need 2016 batteries