answersLogoWhite

0

An idle cylinder refers to the state when the engine is not coupled with the drivetrain and with throttle pedal not depressed. There is rotational speed but it is not enough to move the vehicle.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Art & Architecture
Related Questions

What should a 300 6 cylinder idle at?

Idle should be between 500 to 750 RPM.


What should the idle speed be on a 2008 avenger 4-cylinder?

The computer will set the idle between 600 and 1200 rpm.


If your 1994 Probe 4 cylinder will not idle what do you need to do?

Hey Bill==It is probably the idle speed solonoid. Have it checked out. GoodluckJOe


How do you adjust the idle on 2003 Grand Caravan 6-cylinder 3.3 L engine?

Idle is computer controlled and is not adjustable.


What is the idle RPM on a 1990 Nissan 4 cylinder d21?

.750


How can you get the low 500 rpm idle up a little on a 1994 Jeep Grand Cherokee 6 cylinder?

The idle speed is computer controlled. If the idle is too low, there is a problem with a ssensor or the idle speed motor.


Your Car shakes when AC is on what could it be?

Is it a 4 cylinder? Sometimes a 4 cylinder engine will shake a little extra when the AC is running and it's at an idle. You might be able to step up the idle a little extra but 4 cylinder engines are notorious for shaking when the AC is running.


What is the oil pressure for 6 cylinder Jeep Cherokee Laredo 1992?

Should be at least 10 at idle. 25 at idle would be better.


How do you adjust the idle on a 1988 Chevy Cavalier 2.0 four cylinder?

You can not adjust the idle screw, it is sealed off at the factory. If you are having a high idle problem check for a vacuum leak or a bad idle air control valve. These will commonly cause a high idle.


What is the normal oil pressure of a 2000 jeep wrangler 4 cylinder?

Normal is 30 at idle. 50+ at 3000 rpm. Minimum is 12 at idle.


Is 60psi a good cylinder compression for a Chevy 283?

NO. It should start at about 150 LBS. PER cylinder. And you can't have anymore then a 15 Lb. difference in any cylinder, are the engine will idle rough.


What causes car to shake when idle?

Cylinder misfire. Possibly failed or failing engine mounts.