0
What else can I help you with?
What is a hex wrench?
what the hex a wrench? Hex wrench is short for hexagonal wrench, that is a wrench or spanner designed to fit a certain size nut or bolt.
What size wrench changes a Honda civic thermostat?
i dont know exact size wrench but if you are having trouble making wrench fit, u need to use metric wrench
Can you use a torque wrench in both directions?
Yes, you can use a torque wrench in both directions.
What does the wrench symbol mean on a 2006 trailblazer?
That little wrench icon is notifying you that scheduled maintenance is due.
What is an ignition switch modulator?
You mean, I think, ignition switch module, which is the location of the ignition switch.
What is the wrench symbol means in 2000 peugeot 406?
The wrench symbol is the service indicator. On the 406 the wrench symbol is displayed with milage to service when ignition is switched on.
How do you reset wrench light after oil change Honda odyssey?
To reset the wrench light on a Honda Odyssey after an oil change, turn on the ignition without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn off the ignition. When you start the vehicle again, the wrench light should be reset.
2006 passat service reset?
Turn the ignition switch to off, then press and hold the service wrench button. While still holding the button, turn your ignition to on without starting the car. Press the clock button marked "Min" and then release the wrench button.
How do you remove an ignition on a 1992 Lincoln town car?
With the key turned to on find something like a thin Allen wrench and push it in to the hole under the ignition and it should pull right out
How do you replace ignition module on 1991 ford f-150?
Look on the side of your distributor. It takes a special wrench to remove it if it is there.
How do you reset the polaris ranger wrench light?
To reset the Polaris Ranger wrench light, first ensure that any maintenance or issues indicated by the light have been addressed. Then, turn the ignition key to the "On" position without starting the engine. Press and hold the "Mode" button on the display until the wrench light turns off, indicating that the maintenance reminder has been reset. Finally, turn off the ignition and restart the vehicle to confirm the reset.
How do you get the wrench sign off Honda dashboard?
That is the maintenance required light. With the ignition off, push and hold the odometer reset button and then turn the ignition to the on position but do not start the engine. After a few seconds the light will go out.
How do you get your ignition switch out of your 1997 flh harley?
Turn it to ACC., look from under the ignition cover you'll see a little pin. Have your key in the ignition. Depress the pin with a screwdriver or Allen wrench and turn the ignition counter-clockwise. The stem will pull out. The manual says to remove the radio to remove the switch, which requires removing the outer fairing.
How do you reset the check engine light on a VW?
It is very easy to reset the check engine light on a VW car. All you have to do is to push the wrench button located near the trip reset. You will hold it in while turning on the ignition. after the service message appears, let go of the wrench button and hold in the minute button. Turn the ignition off and the computer will reset.
How do you reset the service now display on a 2006 VW Passat?
Press and hold the service wrench button with the ignition off. While still holding the button, turn your ignition to "on" (but don't start the car). Press the Min clock button and then release the wrench button. I found these steps work well: 1. Key in slot (no Accessory activated) 2. Hold "0.0" 3. Push key in to activate Accessories 4. Push "wrench" icon button 5. Release "0.0" 6. Start vehicle
How do you reset wrench on 2000 500s?
To reset the wrench indicator on a 2000 Fiat 500, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After releasing the pedal, the wrench indicator should turn off, indicating that the maintenance reminder has been reset. If the indicator remains on, repeat the process.
How do you replace the ignition switch on a ford f 250?
when u turn the ignition to run ,look under the key switch thee shoud be a small hole stick a small Allen wrench or something n itll pop out n u can switch ignitions
