You shouldn't replace anything until you've checked out the diagnostic codes. Find out what the computer has detected. Then start going through to isolate the problem. If you just replace a bunch of parts, I can almost guarantee that something will get connected wrong then you'll NEVER be able to find the problem.
Click the link.
there are 2 main reasons 1 the engine is not getting enought petrol 2 spark engine is not getting spark this is probley the cause the main thing that goes wrog with the spark is the ht coil replace this and the spark plug and your engine should start
It should try to start at least. It may or may not actually start but you should hear it fire on the 2 good plugs. Why not just replace all 4 spark plugs?
Is there spark at the plus? is there fuel pressure to the injectors?
This model should have an individual coil on top of each spark plug. Unbolt the coil to remove\replace the spark plug underneath it. Hope this helps.
It should be .050
they will give you options when you buy them from the auto parts store
To replace spark plug wires on a 3300 Oldsmobile engine, open the hood and remove the wires from the end of the engine. The number of spark plug wires most often corresponds to the number of cylinders your engine has.
You should replace the spark plugs when your car won't start first time but does eventually.
crank or cam sensor...did you already figure it out?
The spark plug gap on a 96 Olds Aurora should be set at .050, and they should be torqued at 11 foot-pounds.
HEI should be at .080. If not HEI then .045
where would the spark plugs at on a Oldsmobile 1989 engine
Aprox $350 parts and labor just to replace the spark plugs.
how do change the spark plugs and the coil pack on a 2000 Oldsmobile intrigue
What parts did you replace? If spark plug wires were removed, you might have them on the wrong posts. NMI You should have taken the car to an independent repair shop to begin with, you may be burying the problem by guessing.
To replace spark plugs, you can use a socket wrench, but a socket made for removing and replacing spark plugs is needed. This socket is relatively inexpensive and can be found at most auto parts stores.