Depends on your vehicle model, but probably a set of wrenches and/or a socket set will suffice.
They're frequently located in difficult to reach areas, so you might want those to be long-handled offset wrenches. In some cases, you can come in through the wheel well, so whatever it takes to remove the mud guards from there could be useful also.
You MUST understand ALL steps in repair manual, and if you do, the tools you need are self explanitory.
You need the linoluem prints and the tools you need.
If the light for the gear shift on the console does not work on a 2002 Toyota Camry, it is probably a burned out bulb. The console will need to come off to access the bulb to change it. This part is held onto the console area by screws.
Many vehicles will only require your basic tools but there are some out there that require special tools such as the Cadillac with the North Star engine.
You will need a GOOD pitman arm puller.
No, but after changing make sure system is evacuated prior to charging
I believe you need 17 mm box wrench for that.
how to change water pump on 1996 olds ciera and what tools do i nees
Let a professional do it, he will need specialized tools to reinstall the CV joint.
You do not need to, but it's highly recommended. If water pump fails after you change the belt, you will have to do the same work as before to replace the pump.
03 camry 4 cylider has a timing chain a 03 v6 camry hmilesas a belt and you change it every 90,000
No, you do not need to be pro to change shocks. You have to have some pro tools though: Torque wrench, spring compressors, tool box, Deep creep if you having problems with rusted bolts...
Wrenches: 10 mm, 12mm and 14 mm.
are there grease fittings to be lubricated with a oilchange on a 2007 toyota camry?
I have a 1997 Toyota Camry. It is leaking anti-frezze. I need to replace the water pump. Do I have to remove and replace timing belts too?
wrench
No you dont need any special tools to change the water pump you just need to create space around the area because its in a closed in spot and it is alot of screws to take off ..
It can be a sticky caliper or you need to change brake pads.