0
Your local auto parts store
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you install a 1997 E320 Mercedes Benz blower motor?
The blower motor is located above the passenger foot well inside the dashboard below the glovebox. I recently changed my blower for $230. it is not that difficult. I understand the dealer charges much more. It is accessed from the panel above the footwell. With a phillips screwdriver remove two screws holding the panel in. pull the panel down and towards the passenger seat. (you can leave the light wire attatched and lean the cover against the transmission hump. Now you will need a Torx driver to remove 5 torx screws holging the blower cover in place. Disconnect the electrical connection to the fan blower where it meets the blower box. Use the same torx drive to remove the 4 torx screws holding the blower in place. For pictures of this disassembly look at the website in the related links.
What is starting screwdriver?
to start something... start w/ a starting screwdriver
What size torx bit wrench is used to remove wheel cylinder mounting studs?
Try the Torx bits onto the studs till you find the one that fits securely. Seems simple enough to me.
What are the hand tools used in automotive?
A full set of both SAE and Metric wrenches, Allen keys and sockets. The sockets in 1/4 and 3/8 drive from 1/4 to 1 and 1/4 inch. -A full set of screwdriver bits, flat, Philips, Torx and Allen, a ratcheting screwdriver handle, at least 3 different size crescent wrenches and 2 sizes water pump pliers. Electrician pliers, 2 sizes long nose pliers, 2 sizes 'circlip' pliers. -That is a BASIC set of auto tools.
Who uses a screwdriver and insulating tape that starts with the letter e?
An electrician uses a screwdriver and insulating tape.
What are used of torx screwdriver?
You use them for Torx fasteners.
What is the function of screwdriver torx?
To turn Torx screws.
How do you remove a Set screw?
Torx type? use torx screwdriver
Do you need a t27 torque bit to change the cabin air filter in a 1998 Ford Contour?
Yes, you need a Torx bit to change the filter. I just changed it two weeks ago. You might be able to remove the Torx screw with a regular screwdriver or a vice grip, because it did not seem to be fastened too tight. Mike Smithers.
How do you remove a star set screw?
Torx type? use torx screwdriver
Torx screwdriver size to adjust headlamp 2001 grand am?
I believe that's a Torx 25
What do you need a torx screwdriver for?
Torx screwdrivers are usually used in small electronics like computers and phones.
What is torx screwdriver?
It is a screwdriver with a 6 pointed bit invented and much used in the auto industry.
What is the size of the Torx screw on a 2008 dodge grand caravan tail light?
It is a T30 Torx. A T27 will work, but is slightly loose in the nut. The bulb for stop and turn signal is 3157. Two bolts to remove to get access to the bulbs.
Where is a torx screwdriver?
I assume this means: "Where can I find a torx screwdriver". Torx is a screw, with a hole looking like a six pointed star, or the star of David. You can find a Torx screwdriver in pretty much any hardware store, or well stocked super markets. They come in different sizes, so make sure you get the right size. They also come in the shape of Alan-keys, or hex-keys.
Where can you buy torx screwdrivers?
A Torx screwdriver can be purchased through an online retailer or in store. Online retailers include Amazon, or IFixIt to name a few. In store retailers like Home Depot or Home Hardware would have a Torx screwdriver.
What is torx screw?
Rather than a screw or bolt head having a single slot to take a screwdriver, a torx screw head system uses a six-pointed star shape, and a screwdriver designed to fit.
