p4 processor is used in socket pga478 motherboard.
no, the motherboard has the fm2+ socket while the cpu is a am3
CISC and RISC are the two categories that are used to classify CPU architecture. CISC is an acronym for complex instruction set computer.
Go into bios setup and find the cpu screen that reports the temperature. The temperature should not exceed 38 degrees c. Or 100.4 f.
the max power of cpu is over 95w biostar
No, that would not be proper. The contact point of a light bulb socket has no need of any coating. A light bulb socket that is difficult to turn a bulb in will benefit from some light oil on the bulb threads prior to installing. Dielectric grease will harden, and is meant to insulate and protect electrical junctions from exposure and vibration.
Intel P4
Socket A.
the VLIF socket is used to make use of the set screw to lock the CPU into place.
CPU Socket Type LGA 1366. Hoped I Helped
Socket A is also known as Socket 462. This CPU socket is used for AMD processors, manufactured by Athlon Thunderbird.
A CPU socket is a mechanical connection. Its main function is to serve as a connection that holds the CPU and allows it to communicate with the motherboard.
yes, it used socket P
The microprocessor is installed into the CPU socket on the motherboard. A CPU socket can only fit a certain range of microprocessors.
A VLIF socket is a componet used to lock and hold the computers CPU in place by using a set screw to do this.
it is used for connecting CPU with a phone line or a lan cable so that ur PC comes into network..
That refers to the place where the CPU is plugged in.
It is more expensive than a single CPU socket motherboard