0
What else can I help you with?
What is the color of the filament as you dim the bulb?
A filament radiates black-body radiation, with a range of wavelengths and colours. The intensity peaks at a wavelength that depends on the temperature. As the bulb is dimmed the peak radiation occurs at longer wavelengths and the colour goes from white to brown.
What is filament shaped into?
Bulb's filament are wounded into a coil.
Which elements is used in light bulbs as a filament?
Tungsten ( chemical name Wolfram ) is used for the filament of an incandescent lamp. This is due to ability for making fine guage Tungsten wires , mechanical strength of such wires and the High melting point , which is considerably more than the normal operating temperature of the filament.
How do light-bulbs work?
An electric current passes through a thin filament, heating it until it produces light. The enclosing glass bulb prevents the oxygen in air from reaching the hot filament, which otherwise would be destroyed rapidly by oxidation.
What is the function of the Tungsten filament in a light bulb?
Because it has a very very high melting temperature: 6191F, 3422C. However it is also very difficult to work with, so early light bulbs used carbon for making the filament instead. Around the year 1900, carbon filaments were replaced with tantalum filaments. It was not until about 1910 that it became practical to make tungsten filaments.
What happens to the temperature of the filament as the bulb becomes brighther?
As the bulb becomes brighter, the temperature of the filament increases. This is due to the increased flow of electricity through the filament, causing it to heat up and emit more light. The relationship between brightness and temperature is direct - the brighter the bulb, the hotter the filament.
What happens to the temperature of the filament as the bulb becomes brighter and brighter?
As the bulb becomes brighter, more current flows through the filament, increasing its temperature. This increase in temperature causes the filament to glow more intensely, resulting in a brighter light output.
What type of electromagnetic wave does a filament lamp use?
A filament lamp uses infrared radiation, visible light, and a small amount of ultraviolet radiation within the electromagnetic spectrum.
What is the temperature of bulb filament when it is burning?
The temperature of a bulb filament when it is burning can range from 2,000 to 3,000 degrees Celsius (3,600 to 5,400 degrees Fahrenheit), depending on the type of bulb and the amount of electric current passing through it. This high temperature causes the filament to glow and produce light.
What temperature is the filament inside a working electric bulb?
The temperature of the filament inside a working electric bulb can reach up to around 2,500 to 3,000 degrees Celsius. This high temperature is what allows the filament to emit light and heat up the surrounding area in an incandescent light bulb.
Why bulb filament does not burn at high temperature?
The metal will melt if you do that.
What happens to the current in a circuit if the resistance in increased.?
If resistance is increased, current decreases. Ohm's Law: current equals voltage divided by resistance.
Why is a coiled filament better than a staright filament?
A coiled filament in a light bulb is more energy-efficient than a straight filament because it allows for a longer filament to fit in a smaller space, providing more surface area for light emission. This leads to increased brightness while using the same amount of energy compared to a straight filament.
Graph of resistance of filament lamp against potential difference?
As potential difference increases in a filament lamp, resistance also increases due to an increase in temperature. The relationship between resistance and potential difference in a filament lamp is non-linear due to the temperature-dependent nature of resistance in the filament material. At low voltages, the resistance is relatively low, but as the temperature of the filament increases with higher voltages, the resistance also increases.
What is the difference between filament current and tube current?
The current supplied to the filament for heating is defined as the Filament current. whereas When the filament is heated to a high temperature, the electrons are emitted. The flow of electrons form Cathode to anode is the tube Current.
Why does a filament light bulb stay at a constant temperature of 2500 degrees?
A filament light bulb reaches a high temperature of around 2500 degrees Celsius due to the electrical current passing through the filament, causing it to resist the flow of electricity and heat up. The constant temperature is maintained because the heat generated is balanced by the cooling effect of the surrounding gas inside the bulb, preventing the filament from overheating.
How does the filament inside a light bulb produce light when electricity passes through it?
When electricity passes through the filament inside a light bulb, it heats up the filament to a very high temperature. This causes the filament to glow and emit light, a process known as incandescence.
