To change the clutch cable on a Renault Espace, first, ensure the vehicle is securely parked and the battery is disconnected. Remove the old cable by detaching it from the clutch pedal and the transmission bell housing. Install the new cable by threading it through the same path and securing it at both ends. Finally, adjust the cable tension as needed and reconnect the battery before testing the clutch operation.
If you want to get the bonnet open when the catch has broken and the is no cable to get hold of the Renault Grand Espace; use the screwdriver to PUSH the catch from right to left.
how 2 change a 1999 speedo cable
If it's a Mk2 Clio then the speedo is electronic - Mk1 Clios had cable driven speedos.
Yes, you can fit a speedo cable and pedometer into a Renault Clio 2001 model. You will need to order the part that is made for that make and model from your local auto parts store.
Change the speedo cable!
Are you sure it is a cable driven speedo? I should be electronic. no offence, but if your looking for a cable on a electronic speedo you should take it to a auto electrician or at least a good machanic and find out if it is a cable or not.
clutch cable replace
there is no speedo cable so if your speedo isn't working you either have a faulty sending unit or the dash half of it is bad
Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Pull the speedo and gauge package out of dash. Unhook wiring. Remove speedo cable from speedometer. Pull speedo cable out of housing, lube it lightly and re-insert. Hook everything back up and re-install gauges. Remove gauge package. Remove wires and speedo cable housing. Pull speedo cable out, lightly lube with grease and re-insert. Hook everything back up and re-install gauge packege.
On a Renault Megane, the speedo cable is typically located at the back of the instrument cluster, connecting to the speedometer. It may also route through the engine compartment, linking to the transmission or gearbox, where it picks up the speed signal. Depending on the specific model year, the configuration may vary slightly, so consulting the vehicle’s service manual is advisable for precise location guidance.
If you have a electrical speedo you don't have a cable. Change the speed sensor in the trans.