Press TV, it should light up. Release and press (SELECT & MUTE) and hold for 1 to 2 seconds. Release both buttons and the TV button should remain lit.
Enter 008 first and if needed for the 2nd try, use 009 for your Sanyo TV. You can do this with the power off on the TV. If you hit the code right, the TV should come on right then.
Yes, the Sanyo DP32671 TV is compatible with the GE 25008-v5 universal remote. To program the remote, you can use the code search feature or manually enter the correct code for Sanyo TVs, which can usually be found in the remote's instruction manual. If programming is successful, you should be able to control the basic functions of your TV with the universal remote.
It is the tv that has the set code. Then you need to program the remote to that. Google the manufacturer and make.
I'm trying to program the remote to a Sanyo TV need codes loss instructions
A few different DISH Network remote codes for your Sanyo TV that you can try & one should successfully program your remote are, 590, 090, 720, or 683.
I had a similar problem and used the code for the Sanyo FXWK. The two remotes seem similar and the codes for that worked on my FXWJ remote. You can find the codes here: http://remotes.com/store/codes_original.html . Hope this helps.
The codes relate to the tv set and not the remote. Google the set or sanyo and you will get the code. You then need a universal remote to programme to that code or the instructions for the Philips remote to see if that can be reprogrammed. Again Google Philips and the make.
Sanyo TV codes are 10054 and 11142.See the related link below.
That depends on the model of Sanyo TV. If that isn't apparent to you then you shouldn't be allowed to use the internet unsupervised.
I tried all codes still nothing
I have provided instructions on how to program your remote to your Sanyo TV. I have also provided the codes that should work for your TV.Codes: 590, 683, 589, 090, 591, 111, 652, 542, 987, or 692Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
I need the tv code using a Philips unversal remote for a sanyo tvwww.urc.Philips.com/Phillips official website...
One of these should work.... 1004, 1048, 1049, 1073, 1080, 1162, 1169, 1180.