0
What else can I help you with?
How do you get seat off a 2006 road king?
Remove the screw behind the seat that goes into the top of the rear fender. Lift the rear of the seat and pull straight back, away from the fuel tank. If there is a passenger grab strap, you can pull the seat through the strap or remove the strap.
How do you remove front fender on Harley Davidson road king?
Unplug the front fender tip light (if applicable on your Road King model) and loosen the nuts on the four allenhead screws that hold the fender to the fork sliders. Carefully remove the four screws while supporting the fender, then lift the fender up and out from between the fork sliders. To prevent scratches you might want to tape rags to the bottom of the fender, which is the widest part.
What are the best options for a road bike rear fender to protect against splashes and debris while riding?
The best options for a road bike rear fender to protect against splashes and debris while riding are clip-on fenders or full-length fenders. Clip-on fenders are easy to install and remove, while full-length fenders provide more coverage and protection. Both options can help keep you and your bike cleaner and drier during rides.
How does the seat disconnect on a Road King?
if u have leather bags take them off if u have a stock seat unbolt leather strap from bag mount take out bolt from rear fender pull seat straight back and up
How do you take your seat off of your 2005 road king?
To remove the seat from your 2005 Harley-Davidson Road King, first ensure the bike is on a stable surface and the ignition is off. Locate the two screws or bolts securing the seat at the rear; these are typically found under the seat's rear edge. Use the appropriate tool, usually a Torx or Allen wrench, to loosen and remove these fasteners. Once the screws are removed, lift the rear of the seat up and slide it back to detach it from the front mounting points.
What is the correct Tire pressure for 2004 road king?
40 lbs front and rear
Tire pressure 2008 road king classic?
38 front and 44 rear
How do you I change a rear tire on a 2000 road King?
take it to the Harley Davidson Service Dept.
Where is the air pressure adjustment on a road king?
On the fender bracket behind the right hand panier. -That's 4 the rear. Mine is a 2002 FLHRCI and I believe it came optional. A friend has a 2001 FLHRC and the valve was located about 3 inches from the rear air valve. My friend purchased his new, however I believe it may have been after-market.
How do you remove seat on harley Davidson road king?
To remove the seat on a Harley Davidson Road King, you must unscrew the Philips head screw that is directly behind the seat. Then, slide the seat and unfasten the hook at the front of it.
What does the MT stand for on a MT90B16 rear Tire for a Harley Davidson 2002 road king?
Motorcycle Touring
How do you remove the seat on a road king classic?
If it is the Comfort Flex Seat, raise seat to it's highest level, place 2x4 under front nose of seat to protect seat from slipping and crushing your hand. Unbolt the two bolts that hold a clamp of metal around cross tube above battery and oil tank. Remove plate from under tube by sliding it's tabs out of slots. Now unbolt rear seat bolts from rear fender. Take care lifting seat assembly to avoid scratching rear fender, frame and fuel tanks from the floppy under seat assembly.
