0
take out the ash tray. gently pull up the plastic cover around the gear shifter pulling from the bottom area where the ash tray was. put the gear shifter in neutral to take the cover off (you will need to unplug the cigarette lighters to take off completely). next take the black panel off with the PRND2 by gently releasing the 2 clips on each side front and back, you do not need to take this off completely. you will see the light on the left side. gently turn the light casing 90 degrees to pull it out. replace the bulb, reverse procedures
What else can I help you with?
How do you change a shift console bulb on a 2002 Jeep Liberty?
Begin by removing the 2002 Jeep Liberty shift console retaining bolts. Lift the shift console up and the light bulb will be visible. Take hold of the light bulb, push in and turn at the same time to remove it. Reverse the process to install your new shift console light bulb.
How do you Change Shift Cable On 2002 Highlander?
To change the shift cable on a 2002 Toyota Highlander, start by disconnecting the negative battery terminal for safety. Remove the center console to access the shift cable, then disconnect the cable from the transmission and the shifter assembly. Install the new shift cable by reversing the disassembly steps, ensuring it's properly connected at both ends, and reassemble the center console. Finally, reconnect the battery and test the gear shifting to ensure proper installation.
The light for the gear shift on the console does not work on a 2002 Toyota Camry?
If the light for the gear shift on the console does not work on a 2002 Toyota Camry, it is probably a burned out bulb. The console will need to come off to access the bulb to change it. This part is held onto the console area by screws.
How do you change the light bulb in the center console for the shift lever in Honda civic 1997 EX?
To change the light bulb in the center console for the shift lever in a 1997 Honda Civic EX, first, remove the center console cover by unscrewing the screws and gently prying it off. Locate the bulb socket for the shift lever light, twist it counterclockwise to remove it, and then replace the old bulb with a new one. Reassemble the center console by reversing the steps, ensuring everything is securely fastened. Finally, test the new bulb to ensure it lights up properly.
How do you repair the console shift indicator light of a 2000 Olds Intrigue?
Just remove the console and you can get to it.
How do you change a gear shift light in a 2006 Toyota matrix?
To change the gear shift light in a 2006 Toyota Matrix, first disconnect the negative terminal of the battery for safety. Remove the gear shift knob by unscrewing or pulling it off, depending on the design. Then, carefully pry off the center console cover to access the light bulb socket. Replace the old bulb with a new one, reassemble the console and knob, and reconnect the battery.
How do you change the light bulb for the shift console on a 1998 Subaru outback?
I have a Haynes manual and it shows that you pry off the molding around the shifter. At the 4 corners there are screws that allow you to remove the plastic shift console. Inside on the drivers side is the light bulb. Mine is also out. I have been trying to find out the bulb before I disassembled the shift console. Do you know the bulb spec? Pat Dailey patdailey@comcast.net
How do you change the bulb in 2006 Mercury Mariner console for the shift lever?
To change the bulb in the console for the shift lever on a 2006 Mercury Mariner, first disconnect the vehicle's battery for safety. Remove the console cover by unscrewing any screws or clips securing it in place. Locate the bulb socket for the shift lever, twist it counterclockwise to remove it, replace the old bulb with a new one, and reassemble the console by reversing the steps. Finally, reconnect the battery and test the shift lever light to ensure it works.
How do you replace bulb in shift console for 2004 tracker?
how to replace the light bulb on the gear shift on 2004 tracker
How do you change gear shift light indicator in 2003 Toyota Tundra?
To change the gear shift light indicator in a 2003 Toyota Tundra, you'll need to access the gear shift assembly. Start by removing the console cover around the gear shifter, which typically involves unscrewing a few screws and carefully prying it off. Once exposed, locate the bulb or LED for the gear shift indicator, disconnect it, and replace it with a new one. Reassemble the console by reversing the disassembly steps.
How do you change the light bulb in the gear shift indicator in an aveo?
To change the light bulb in the gear shift indicator of a Chevrolet Aveo, first, disconnect the car battery to ensure safety. Remove the console cover surrounding the gear shift by unscrewing or unclipping it, depending on the model year. Once the cover is off, locate the bulb socket behind the gear shift indicator, twist it to remove, and replace the old bulb with a new one. Finally, reassemble the console and reconnect the battery.
How do you change the shift lever console light bulb in a 2003 Chevrolet Malibu?
To change the shift lever console light bulb in a 2003 Chevrolet Malibu, first, disconnect the negative battery terminal for safety. Then, remove the trim panel around the shift lever by gently prying it off with a flat tool. Once the panel is removed, locate the light bulb socket, twist it counterclockwise to remove it, and replace the old bulb with a new one. Reassemble the trim panel and reconnect the battery terminal to complete the process.
