I actually have a 1998 Acura CL 3.0 and changed the headlights on it 2 weeks ago. The first thing you do after propping the hood is start loosening the plastic fasteners (they should pop off). Once you have them all undone you can remove the entire plastic cover piece. From there you can look to where the back of the headlights would be and see wires in a clip going into the headlight. There should be a little notch that you need to get the wire removed from the bulb. Simply twist and the old bulb comes out and you just follow the same steps backwards to get the new bulb in. NOTE: There is a gel you can place on the inside of the plastic adapter to help your bulb from overheating and frying any wires/bulbs. There is a little package at the autoparts store for 99 cents you can get. Good Luck. I actually have a 1998 Acura CL 3.0 and changed the headlights on it 2 weeks ago. The first thing you do after propping the hood is start loosening the plastic fasteners (they should pop off). Once you have them all undone you can remove the entire plastic cover piece. From there you can look to where the back of the headlights would be and see wires in a clip going into the headlight. There should be a little notch that you need to get the wire removed from the bulb. Simply twist and the old bulb comes out and you just follow the same steps backwards to get the new bulb in. NOTE: There is a gel you can place on the inside of the plastic adapter to help your bulb from overheating and frying any wires/bulbs. There is a little package at the autoparts store for 99 cents you can get. Good Luck.
The headlight assembly on a 1998 Acura Integra is held on by brackets. To remove them loosen the bolts on the brackets. Pull the housings off. Install the new housings by placing them on the brackets.
See the following site:
are you trying to change the entire headlight assembly? or just the bulb.
To change the driver's side headlight bulb on a 1998 Acura 3.5RL, open the hood and remove the old bulb. The new bulb cannot be touched by the fingers so use a small plastic pliers that can be found in the store near the bulbs. Put the new bulb in and gently push and turn.
pull 3 pins up on top of the light and pull the light towards you then disconect the plugs
To replace the headlight on a 1998 Acura CL, first, open the hood and locate the headlight assembly. Disconnect the electrical connector from the back of the headlight bulb, then remove the retaining clip or screw holding the bulb in place. Carefully take out the old bulb and replace it with a new one, ensuring not to touch the glass with your fingers. Reattach the retaining clip or screw, reconnect the electrical connector, and test the headlight before closing the hood.
Remove the two bolts on top of the headlight. Then lift the headlight slightly until it breaks free, and replace bulb by twisting it counter clockwise
the headlight assembly needs to come out in order to replace the bulb.
Opened the 1998 Toyota Camry hood compartment. Take hold of the light bulb connector. Push the connector in and turn at the same time. The light bulb will come out. Reverse the process to install the new light bulb.
how do you take out a headlight switch's in a 1998 cadillac deville?
What does 1998 3.5 rl aura srs light on mean what is problem
there are about for screws that you have to unscrews after hat you are home free