answersLogoWhite

0

What else can I help you with?

Related Questions

Where is the bleeding nut for the clutch on a Hyundai excel?

The bleeding nut for the clutch on a Hyundai Excel is typically located on the clutch slave cylinder, which is situated on the transmission near the engine. To bleed the clutch, you will need to access this nut, usually found on the side of the slave cylinder. Make sure to have a helper to pump the clutch pedal while you open and close the bleeding nut to remove any air from the system. Always consult the vehicle's manual for specific details and procedures.


1997 Hyundai Excel has no gears and is leaking clutch fluid to the ground?

Not 100% sure on an excel, but where is it leaking? If your car has no clutch fluid then you will not be able to change gears, I would check the seals on the master/slave cylinder, as that is one of the more common places clutches leak.


You have to pump your clutch pedal a few times for the clutch to engage on your Hyundai Excel 1997 how do you fix?

you need to bleed your clutch fluid


How do you remove Door Speakers in Hyundai Excel 1999 Model?

How do you remove front door Panel on Hyundai Excel 1999 to Rplace front door SPEAKER'S


How do you remove the glove-box 1998 Hyundai Excel?

I have come to the conclusion myself that the only way to remove the glovebox in a Hyundai Excel is .................................................................................................................get a hammer and smash it to bits


How do you remove the radio on a 1994 Hyundai Excel?

You don't


Why will my clutch pad not disengage 1995 Hyundai Excel?

If the clutch pad in your 1995 Hyundai Excel is not disengaging, it could be due to several reasons. Common issues include low hydraulic fluid levels or air in the hydraulic system, which can affect the clutch master or slave cylinder's ability to operate properly. Additionally, a worn-out clutch disc, pressure plate, or a faulty release bearing may impede disengagement. Lastly, ensure that the clutch pedal is properly adjusted and functioning, as a misalignment can also cause disengagement problems.


How do you remove water pump on a 1995 Hyundai Excel?

Dynamite


What clutch fluid do you use for a 1999 Hyundai excel?

dot 3 brake fluid the blue one


How do you remove ignition barrel from 1996 Hyundai Excel?

Take to the Mechanic .... LOL


How do you adjust your clutch in a Hyundai excel?

To adjust the clutch in a Hyundai Excel, start by locating the clutch cable near the firewall. You can adjust the cable tension by turning the adjusting nut on the cable; turning it clockwise increases tension, while counterclockwise decreases it. Ensure there is about 1-2 inches of free play at the pedal before it engages. After adjusting, test the clutch by pressing the pedal to ensure smooth engagement and disengagement.


When was Hyundai Excel created?

Hyundai Excel was created in 1985.