Mitsubishi Lancer headlight bulb replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
See sources and related links below for the 2002 Mitsubishi Lancer headlight bulb info.
How do remove the headlights in a 2005 Audi A4?
Many similar items can be found on eBay
Here´s the answer..http://forums.evolutionm.net/lancer-how-tos-installations/297464-how-amplifier-installation-remove-radio.html
To adjust the headlights on a 2011 Mitsubishi Lancer, park the car on a level surface about 25 feet from a wall. Turn on the headlights and mark the center of the light beam on the wall with tape. Open the hood and locate the adjustment screws near each headlight; turn them to raise or lower the beam until the top of the beam aligns with the tape marks. Finally, ensure both headlights are properly aligned for optimal visibility.
Just use the "force" to remove It.
Remove the wiring harness from the back of your 1997 Chevrolet Z71 headlights. Remove the headlight retaining bolts. The headlights will come out. Reverse the process to install the new headlights.
you need to remove grille first before you can remove headlights and then there are four bolts to remove headlights it takes about one hour to do this job and have fun.
a press
In a 1994 Mitsubishi Lancer, the headlights fuse is typically located in the fuse box under the dashboard on the driver's side or in the engine compartment. You can identify the fuse box by referring to the diagram usually found on the cover of the fuse box. Look for the fuse labeled for headlights or "H/L" in the diagram. If the fuse is blown, replacing it with a new one of the same amperage should restore headlight functionality.
To adjust the width of the headlights on a 1995 Mitsubishi Lancer, first, park the vehicle on a level surface about 10-25 feet away from a wall. Turn on the headlights and mark the center of the light beams on the wall. Locate the horizontal adjustment screws, typically found on the headlight assembly, and turn them clockwise or counterclockwise to align the beams to the marked points. Repeat this process for the other headlight to ensure both are properly aligned.
Remove the wiring harness from the back of your 2003 VW Jetta. Remove the headlight assembly retaining bolts. The headlights will come out. Reverse the process to install your new headlights.