To remove spark plug wires on a 2002 Kia Rio, first ensure the engine is cool and disconnect the negative battery terminal for safety. Carefully grip the boot of the spark plug wire near the engine and twist it slightly while pulling it straight off, avoiding pulling on the wire itself. Repeat this process for each wire, taking note of their order for reinstallation. If the wires are stuck, you may use a pair of pliers to gently help pull them off, being cautious not to damage the wire or the plug.
Remove and replace the wires one-at-a-time, following the same routing.
"http://wiki.answers.com/Q/How_do_you_remove_the_spark_plug_wires_from_Chevy_Avalanche_2002"
Pull them off of the spark plugs and distributer cap. . .
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
There are no plug wires. The Intrepid has a coil on plug system.
Disconnect the battery, remove the engine cover, remove the spark plugs wires and boots, and remove the spark plugs. Put in the new spark plugs, replace the spark plug wires and boots, replace the engine cover, and connect the battery.
there are no wires. each spark plug has it's own "coil on top" remove the coil by pulling straight up . then remove and replace the spark plug. That wrong ther are wires on the 3.5 and it,s not easy you need to remove the intake manafold to remove & run new wires
Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.
Disconnect the battery, and remove the spark plug wires one by one. Replace the spark plug wires in the same order, ensure the connection is firm, and connect the battery.
At the end of all the spark plug wires.
No. However, newer plug wires can be extremely difficult to remove without damaging them.
The 2002 Honda Civic EX engine uses coil-on-plug. There are no sparkplug wires.