0
Yes I just did yesterday. Start by pulling out the panel that has the seat heat switches...it just pulls out toward you. That reveils to bolts that must be romoved. Than at the top of the dash there is a tray that many people put change and sunglasses in. This tray has a felt insert that you pry up with a screw driver. It just snaps in. This allows you to remove two screws. Once this screws are out the tray just pulls out. This allows you to remove the heater/air vents. They also just pull out. With them removed you can now remove the two top bolts that hold the stereo/air control panels. They are bolted together and come out as a unit. Remove all electrical cannon plugs and separate the units by removing the bolts on the side of the stereo unit.
This was under the title. How to remove the car stereo for a 2002 Lexus IS 300.
What else can I help you with?
How do i Replace brake light bulb on 2002 Lexus is300?
remove bulb from in side the boot
What type of freon do you use for a 2002 Lexus is300?
R134a
Will a 2002 Lexus is300 transmission fit in a 2001 Lexus is300?
every year Is300 transmission will fit. All E-Shift automatics are the same and all W55 5speeds are the same.
Where is the starter located on a 2002 Lexus IS300?
The starter on a 2002 Lexus IS300 is located on the driver's side of the engine, near the transmission. It is positioned below the intake manifold and can be accessed from underneath the vehicle. To replace or service the starter, it's often necessary to remove components like the air intake and battery for better accessibility.
Does the 2002 Lexus IS300 have a timing belt and when does it need to be changed?
YES. Lexus recommends this changed at 90K miles
How do you remove the front hub assembly on a 2002 Lexus is300?
To remove the front hub assembly on a 2002 Lexus IS300, start by safely lifting the vehicle and removing the front wheel. Disconnect the brake caliper and rotor, then remove the axle nut. After that, detach the tie rod end and lower ball joint, and finally, unbolt the hub assembly from the strut and remove it carefully. Ensure all components are properly supported and refer to a repair manual for specific torque specifications during reassembly.
How do you locate a solenoid on a 2002 Lexus IS300?
To locate the solenoid on a 2002 Lexus IS300, first identify the specific solenoid you're looking for, as there are multiple in the vehicle (e.g., transmission solenoid, fuel injector solenoid). For the transmission solenoid, it is typically found on the transmission body, which is located underneath the vehicle. You may need to remove the transmission pan to access it. Always refer to a repair manual for detailed instructions and diagrams specific to your model.
Where can you find a diagram of the front suspension of a 2002 Lexus IS300?
http://my.is/sign up and you can search the forum lots of good writups
How do you put driver side window back on track on a 2002 Lexus is300?
To put the driver side window back on track in a 2002 Lexus IS300, first, remove the door panel by unscrewing any visible screws and gently prying it off. Once exposed, check the window regulator and ensure the window is positioned correctly in the track. Carefully lift the window back into the track and secure it, then test the operation. Reattach the door panel and screws once the window is functioning properly.
How do you replace the catalytic converter on a 2002 Lexus IS300?
To replace the catalytic converter on a 2002 Lexus IS300, first, safely lift and secure the vehicle. Disconnect the negative battery terminal, then remove the exhaust pipes connected to the catalytic converter using appropriate tools, such as a socket set. Unbolt the old catalytic converter from its mounting points and replace it with the new one, ensuring all gaskets are in good condition. Reassemble everything by reversing the disassembly steps, and reconnect the battery before starting the vehicle to check for leaks.
Oil drain plug torque for 2002 Lexus is300?
The oil drain plug torque specification for a 2002 Lexus IS300 is typically around 29 ft-lbs (39 Nm). It's important to ensure that the drain plug is properly torqued to prevent leaks or damage to the oil pan. Always use a torque wrench for accuracy and consult the owner's manual for any specific recommendations.
How do you remove the glove compartment for a rx300?
how do you remove the glovebox in an rx300 lexus 2002
