0
To remove the door panel on a 1999 Mazda Protege you need to do the following:
1. there is a screw hidden behind a cover that can easily be opened on the door's side that is closer to the body - unscrew it.
2. there is a pin by the latch that keeps that door closed, it has two layers. you need to pull out the only the pin which is the smallest layer.
3. there are two screws holding the handle in place - remove them.
4. behind the handle there are two more screws - unscrew them too.
5. there is a screw holding the inner lever - unscrew it.
6. carefully pull out all the click on connectors that are places all around the door.
7. carefully pull up the electric window switch if you have it (start from the back of it).
8. Carefully push the lever and window switch into the door so that they stay hanging when you take out the panel.
9. You need to pull the door about 2 inch up from the window before you take it out. pull it away from the body first to take it from under the mirror and then up.
10. now put the door panel back carefully so that you do not move the lock out of place.
11. make sure you know which screws go where!!!
LVS.
What else can I help you with?
How do I get my lug studs off a 1999 mazda protege dx?
You can use the end of the tire iron to remove the lug bolts off a 1999 Mazda Protege DX.
How do you change thermostat on a 1999 Mazda protege?
where is the thermostat on a 1999 mazda protege?
Where is the turn signal flasher located on a 1999 Mazda Protege?
Where is the flasher relay on the 1999 mazda protege
1999 Mazda protege window issues?
Yes, 1999 Mazda protege window issues indeed....
How do you get a key out of an ignition of a 1993 Mazda protege it is stuck and you cant even start it or remove the key?
i have no clue i have the same problem with my Mazda 1999 626
How do you replace the alternator belt on a 1999 Mazda Protege?
Remove the power steering belt first then the alternator belt will go on.
Where is the horn on the 1999 Mazda Protege?
in the stearing wheel
Does Mazda Protege 1999 has ABS?
Yes it does have ABS. The older Protege 1997 and older dosnt.
What is the head bolt torque for 1.6 Mazda protege?
whar are the torque specs for head bolt on a 1999 Mazda protege 1.6 engine
What size is lug nut for 1999 Mazda protege?
12.5mm
Where is the erg on a 1999 Mazda Protege?
under the trottle body
Where's the voltage regulator in 1999 Mazda Protege?
The Main Voltage regulator it built into the Alternator There is also one on the instrument panel to stabilise the voltage to the gauges
