0
What else can I help you with?
How do you remove and replace 1991 Toyota MR2 radiator?
Remove the front bumper to remove the radiator
How do you change the clutch on a 1989 Toyota MR2 turbo?
Take the trans out, the clutch is inside the trans ^_^
How do you replace the water pump on a 1991 Toyota MR2?
changing the water pump is quite involved. I recommend a manual. The BGB is expensive, but is well worth it.
1991 Toyota MR2 lug pattern?
5-on-114.3 mm
How do you replace a speedometer cable on a 1991 Toyota MR2?
To replace the speedometer cable on a 1991 Toyota MR2, first, disconnect the negative battery terminal and remove the instrument cluster by unscrewing the necessary screws and gently pulling it out. Locate the speedometer cable at the back of the cluster and unscrew it from the speedometer. Next, trace the cable to the transmission, disconnect it there, and replace it with a new cable by reversing the removal steps. Finally, reassemble the instrument cluster and reconnect the battery.
Where is the air filter located on a 1991 Toyota MR2?
On a 1991 Toyota MR2, the air filter is located in the engine compartment, specifically in a rectangular air filter housing on the driver's side. To access it, you'll need to remove the housing cover, which is typically secured with clips or screws. Once the cover is off, you can easily replace the air filter inside.
How do you change the clutch cable on an 1985 mr2 na?
You have a hydraulic clutch in your mr2, no cable.
Where is the heater core located in 1991 Toyota MR2?
behind the dashboard on the passengers side
How many quarts of gear lube to fill a 1991 Toyota MR2 transmission?
Four.
What engines are compatible with a 1991 Toyota MR2?
The 1991 Toyota MR2 came in three different variants each supplying different levels of power. The 5S-FE, 3S-GE, and 3S-GTE. The GTE came standard with a turbocharger.
How do you tighten the clutch in a 1985 Toyota MR2?
The clutch is hydrolic and should adjust automaticly unless there is a leak or air in the line. there is really no way of adjusting it manually
Where is the AC clutch relay on a 2003 Toyota MR2 Spyder?
The AC clutch relay on a 2003 Toyota MR2 Spyder is located in the engine compartment fuse box. To find it, open the engine cover and locate the fuse box on the driver's side. The relay is typically labeled, so consult the diagram on the cover of the fuse box for the exact position. If you need to replace it, ensure the engine is off and disconnect the battery for safety.
