To reset the ABS sensor light in a Honda Element, first, ensure that the underlying issue triggering the light has been resolved. Then, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn off the ignition. Restart the vehicle, and the ABS light should be reset. If it remains on, further diagnostics may be needed.
How do you reset 2008 honda element service light?
You can't reset that light...there is no such thing as a 2002 Honda Element...they didn't come out until 2003.
One way to reset a 2005 Honda Element check engine light is to disconnect the battery. The battery will need to be disconnected for about 5 minutes for the light to reset.
This is how it is done on a Honda Accord and your Element should be the same. Push and hold the odometer reset button in while at the same time turning the ignition switch to the on position without starting the engine. After 5 seconds the light will reset.
It must be reset by a Honda Dealer. The light is on because there is a problem with the system. I am sure you do not want the airbag to not function as it should or prematurely deploy.
seat belt sensor needs to be replaced
To reset the maintenance light in a 2005 Honda Element, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off. Finally, turn the ignition off and then start the engine to ensure the light has been reset.
problem is not sensor but is in wiring to sensor or computer
Here is how you reset it on an Accord so I would think it would be the same on an Element. Push and hold the odometer reset button while at the same time turning the ignition on without starting the engine. After 5 seconds the light will reset.
www.vehix411.comAnswerI just got my 2003 Honda Element back from having the door fixed, and noticed the airbag light was on. I called the folks who fixed the car, and they said it would have to be reset at the Honda Dealership. I was told they have to run some tests on why the light was on, and the Honda dealership is the only place in town who can do that. Also, I was told that while the light was on, that the airbag would not deploy GO TO WWW.VEHIX411.COM AND WATCH FREE VIDEO INSTRUCTIONS ON HOW TO RESET IT WITHOUT A COMPUTER
how to reset a tire sensor for a 2008 Honda civic si
To reset the airbag light on a 1994 Honda Civic locate the wiring for the SRS unit underneath the dashboard. There will be a yellow clip that connects to a fuse box. Unplug it and jump the sensor using two small wires. Turn the car on and off twice to reset the light.