Turn key off ,push and hold reset button on dash,turn key on continue to hold button until light goes out
To reset the maintenance required message in a 2006 Acura TSX, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine, and the maintenance light should be reset. If the light remains, repeat the process.
To reset the service reminder on a 2006 VW Golf MK6, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and start the engine to verify that the service reminder has been reset. If the reminder still appears, repeat the steps.
hold the reset button until it pops up
Put on your seat belt, that is what it is there for, don't fight the system!!
To reset the service reminder for a 2006 Royal Caprice, turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you start the vehicle again, the service reminder should be reset. If this method doesn’t work, consult the owner’s manual for specific instructions.
To reset the service reminder on a 2006 VW Polo 1.6, first turn on the ignition without starting the engine. Press the trip reset button on the dashboard until the mileage display shows "Service." Then, hold the button down for about 10 seconds until the service indicator resets. Finally, turn off the ignition to complete the process.
To reset the "Service Due Soon" light on a 2006 Acura TL, start by turning the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and back on; the light should be reset. If it doesn’t turn off, repeat the process.
You will find that info in the drivers manual.
To reset the maintenance message on a 2006 Volvo V70, turn the ignition key to the "II" position (just before starting the engine). Press and hold the trip odometer reset button on the dashboard, then turn the ignition off. While keeping the button pressed, turn the ignition back to the "II" position again until the maintenance message disappears, then release the button. The maintenance light should now be reset.
Hold trip reset button down then turn key on but do not crank engine over light maint. light will go off after a couple of second.
Answer : to reset the display do the following : with the ignition switched off, press and hold the trip meter reset button below the speedometer. Switch the ignition on and hold the reset buttton for at least 10 seconds. Dashes appear in the display. The service has been reset.
check here for an answer: http://www.tundrasolutions.com/forums/lexus/77653-2006-gs-300-oil-reminder-light/ 2006 GS 300 Oil Reminder Light ---- For those of you who like I have a 2006 GS 300, the proceedure . . . to reset the oil maintenance light . . . :1. With the car running set the odometer to display total vehicle miles - not to the trip odometer.2. Shut the vehicle off.3. With the trip odometer reset button held down, switch the vehicle to on (ie push the start button twice without your foot on the brake).or here: http://us.lexusownersclub.com/forums/index.php?showtopic=22489"hold down the reset button in the drop down button compartment and turning the car on and off" or "That same compartment on the left that you open in order to to pop the trunk has the reset button on it. When you press it scroll to the oil change message and hit reset."Hope this helps. Take care.