To replace the CV boot on the driver side of a 2004 Hyundai Santa Fe, start by safely lifting the vehicle and removing the front wheel. Next, disconnect the axle from the wheel hub and remove the old CV boot clamps. Slide off the old boot, clean the joint, and apply fresh grease before placing the new boot onto the axle. Finally, secure the new boot with clamps, reassemble the axle to the wheel hub, and reinstall the wheel.
If you are talking a bout a plug wire boot, $ 20.00. I am going to replace it myself this weekend on cyl. #3. $55.00 for boot and coil at auto parts stores.
lift the boot, and grab a screw driver and unscrew the light and then at the back of the light twist the bulb out and replace and twist it back in afterwards.
remove the console, you should see some screws on the bottom of the boot, remove, replace boot, replace console
black
cash stash, boot loot
A CV boot is found on the axle of a vehicle. To replace the outer boot remove the axle bolt and pull the boot off. The inner boot requires removal of the whole axle.
you cannot just change the boot you will have to replace the whole axle
Santa's money that he stashes in his shoe is his boot loot
What boot are you referring too?
boot loot
Wine Boot Camp has new mission sites each year.
The cost to replace a CV boot or axle on a 2004 Audi typically ranges from $150 to $400, depending on the specific model and whether you opt for OEM or aftermarket parts. Labor costs can vary, but expect to pay around $100 to $150 for installation at a mechanic. If you need to replace the entire axle rather than just the boot, the total expense may increase significantly, potentially reaching $800 or more. Always get a detailed estimate from a trusted mechanic for the most accurate pricing.