how do you remove the glovebox in an rx300 lexus 2002
The PCV valve on a 2002 Lexus RX300 is located on the passenger side of the car underneath the hood. The valve will be on the rear valve cover.
Lexus has to hook their computer to it to program the key to both lock/unlock and to start the vehicle.
To replace the headlights in a 2002 Lexus RX300, first, open the hood and locate the headlight assembly. Disconnect the power connector from the back of the headlight bulb and remove the rubber cover. Twist the bulb socket counterclockwise to release it, then pull out the old bulb and insert the new one, making sure not to touch the glass. Finally, reassemble by reversing the steps and test the new headlight.
On the open road or freeway with mild inclines.
It costs around $700.00 to replace the timing belt. It is a good idea to replace the water pump at the same time. I hope my answer helps
Timing belt.
On a 2002 Lexus RX300, the fuse boxes are located in two main areas. The first fuse box is under the dashboard on the driver's side, near the steering column. The second fuse box is in the engine compartment, typically positioned near the battery. You can access both by removing the cover panels.
To replace the front wheel bearing on a 2002 Lexus RX300, start by safely lifting the vehicle and removing the front wheel. Next, detach the brake caliper and rotor to access the hub assembly. Remove the hub assembly by unbolting it from the steering knuckle, and then use a bearing puller to extract the old bearing. Install the new bearing into the hub, reassemble the hub with the knuckle, and reattach the caliper and rotor before putting the wheel back on. Always ensure all components are torqued to the manufacturer's specifications.
On a 2002 Lexus RX300, the PCV (Positive Crankcase Ventilation) valve is located on the engine's valve cover. Specifically, it can be found on the driver's side, near the rear of the engine. You may need to remove the engine cover to access it easily. Be sure to check the valve and its hose for any signs of wear or blockages.
To tow a 2002 Lexus RX300, you'll need a compatible tow hitch that can handle the vehicle's weight, a tow strap or tow bar, and a suitable towing vehicle. Ensure that the towing vehicle has sufficient towing capacity and that the RX300 is in neutral with the ignition off to prevent damage to its transmission. Additionally, it's advisable to check local laws regarding towing equipment and safety features like lights and brakes.
YES. Lexus recommends this changed at 90K miles