On a 2002 Lexus RX300, the fuse boxes are located in two main areas. The first fuse box is under the dashboard on the driver's side, near the steering column. The second fuse box is in the engine compartment, typically positioned near the battery. You can access both by removing the cover panels.
how do you remove the glovebox in an rx300 lexus 2002
Lexus manufacturer recommend replace timing belt on Lexus rx300 every 105,000 miles.
The PCV valve on a 2002 Lexus RX300 is located on the passenger side of the car underneath the hood. The valve will be on the rear valve cover.
Lexus has to hook their computer to it to program the key to both lock/unlock and to start the vehicle.
Check the relay, there are 3 drl relay siting rigth above the radiator.
On the open road or freeway with mild inclines.
On a 2002 Lexus RX300, the PCV (Positive Crankcase Ventilation) valve is located on the engine's valve cover. Specifically, it can be found on the driver's side, near the rear of the engine. You may need to remove the engine cover to access it easily. Be sure to check the valve and its hose for any signs of wear or blockages.
Yes, the 2002 Lexus RX300 has a non-interference engine. This means that if the timing belt were to fail, the engine's pistons and valves would not collide, preventing potential severe engine damage. However, it's still important to maintain the timing belt and replace it at the recommended intervals to avoid other issues.
To tow a 2002 Lexus RX300, you'll need a compatible tow hitch that can handle the vehicle's weight, a tow strap or tow bar, and a suitable towing vehicle. Ensure that the towing vehicle has sufficient towing capacity and that the RX300 is in neutral with the ignition off to prevent damage to its transmission. Additionally, it's advisable to check local laws regarding towing equipment and safety features like lights and brakes.
Check out this diagram, should be all you need! http://img125.imageshack.us/img125/7711/bodywt1.jpg
Trouble code P0046 means: Turbo/Super Charger Boost Control Solenoid Circuit Range/Performance
The brakelight sensor is located on the brake switch, which is on top of the brake pedal and held on with a 14mm jam nut.