Check out this diagram, should be all you need! http://img125.imageshack.us/img125/7711/bodywt1.jpg
how do you remove the glovebox in an rx300 lexus 2002
Lexus manufacturer recommend replace timing belt on Lexus rx300 every 105,000 miles.
The PCV valve on a 2002 Lexus RX300 is located on the passenger side of the car underneath the hood. The valve will be on the rear valve cover.
Lexus has to hook their computer to it to program the key to both lock/unlock and to start the vehicle.
how to remove front bumper 2002 Impala
On a 2002 Lexus RX300, the PCV (Positive Crankcase Ventilation) valve is located on the engine's valve cover. Specifically, it can be found on the driver's side, near the rear of the engine. You may need to remove the engine cover to access it easily. Be sure to check the valve and its hose for any signs of wear or blockages.
next to the oil filter if it has one installed. remove cover plate and install heater not an easy job. tip get it installed by a autoshop
On the open road or freeway with mild inclines.
To replace the headlights in a 2002 Lexus RX300, first, open the hood and locate the headlight assembly. Disconnect the power connector from the back of the headlight bulb and remove the rubber cover. Twist the bulb socket counterclockwise to release it, then pull out the old bulb and insert the new one, making sure not to touch the glass. Finally, reassemble by reversing the steps and test the new headlight.
To change the navigation disc in a 2002 Lexus RX300, first, turn on the vehicle and the navigation system. Open the navigation screen and press the "Eject" button on the dashboard or the navigation unit to remove the old disc. Once the disc is ejected, insert the new navigation disc, ensuring it is oriented correctly. Finally, wait for the system to recognize the new disc, which may take a moment.
On a 2002 Lexus RX300, the fuse boxes are located in two main areas. The first fuse box is under the dashboard on the driver's side, near the steering column. The second fuse box is in the engine compartment, typically positioned near the battery. You can access both by removing the cover panels.
Remove the screws in the wheel wells and underneath the plastic cover to remove the bumper cover. Then you can see to remove the actual bumper.