To remove the exhaust manifold on a Honda Element, first ensure the engine is cool and disconnect the negative battery terminal. Remove any components obstructing access to the manifold, such as the intake manifold or heat shield. Unbolt the exhaust manifold from the cylinder head, carefully noting the order of the bolts for reinstallation. Finally, detach any remaining connections, such as the exhaust pipe, and remove the manifold from the engine bay.
Are you trying to remove the exhaust manifold,the muffler,or just the line running from the manifold connection to the muffler?
The 1995 Honda Odyssey exhaust manifold bolt torque specification is 45 pounds. The exhaust manifold bolts should be torqued in 15 pound intervals.
it is in the exhaust manifold,or exhaust pipe...
It is located next to the gas tank. No it is not. It's under the intake manifold. You must remove the intake manifold to get to it.
The gasket is between the head and the manifold and simply remove the bolts and replace the gasket after cleaning it real good.
Os sensors are always in the exhaust. Look either in the exhaust manifold or right after the exhaust manifold. HTH
The oxygen sensor on a 1988 Honda Prelude fuel injected engine is on the exhaust manifold. It screws directly onto the front of the exhaust manifold.
After the exhaust manifold but before the catalytic converter on the exhaust tube.
They are typically on the exhaust manifold.
in the catalyc converter... exhaust manifold
it's in the exhaust manifold
Unlock and pull out from the exhaust