To replace the radio antenna motor on a 2001 Toyota Sequoia, first, disconnect the battery to ensure safety. Remove the interior trim panel surrounding the antenna, typically located on the rear fender or roof. Unbolt the old antenna motor from its housing, disconnect the wiring harness, and install the new motor by reversing the steps. Finally, reattach the trim panel and reconnect the battery to complete the installation.
To remove the antenna motor on a 2004 Toyota Sequoia, first, ensure the vehicle's battery is disconnected to avoid electrical issues. Then, access the antenna motor by removing the interior trim panel in the rear quarter panel where the motor is located. Disconnect the wiring harness and unscrew the mounting bolts holding the antenna motor in place, and finally, pull out the motor gently to detach it from the vehicle. Reassemble by reversing these steps.
how do you replace a antenna motor for a 2000 Toyota landcruiser
To replace the antenna motor on a 1998 Toyota 4Runner, first, remove the interior trim panel from the rear of the vehicle to access the motor. Disconnect the wiring harness and the antenna cable, then unbolt the old motor from its mounting bracket. Install the new motor by securing it in place, reconnecting the wiring, and reattaching the trim panel. Finally, test the new motor to ensure it operates correctly.
I believe you have to take off the Wheel Well liner and access to access the antenna.
What kind of Toyota?
To replace the antenna on a 1989 Toyota Camry LE, first, ensure the car is turned off and disconnect the battery. If it has a power antenna, you may need to remove the interior trim panel to access the antenna's motor and wiring. Unscrew the old antenna from the exterior, disconnect its wiring, then install the new antenna by reversing the steps. Finally, reconnect the battery and test the antenna to ensure it functions properly.
remove the pass. finder linner and find plug to the motor and disconnect it
To replace the sunroof motor in a 2002 Toyota Sequoia, first, disconnect the vehicle's battery to ensure safety. Remove the headliner by taking out the necessary trim and screws to access the sunroof assembly. Disconnect the old motor's wiring harness and unbolt it from the sunroof frame, then install the new motor by reversing the process. Finally, reattach the headliner and reconnect the battery to test the new motor.
5
To repair a Toyota Matrix antenna, first, inspect the antenna for any visible damage or wear. If it's a manual antenna, ensure the cable is intact and the mounting base is secure; you may need to replace the antenna mast if it's broken. For power antennas, check the motor and wiring for faults, and if necessary, replace the entire antenna assembly. Lastly, reassemble everything, ensuring all connections are secure, and test the radio reception.
unplug the electrical from the antenna. replace antenna.
First, you must go into the trunk of the car and remove the left side panel beside the antenna. this chould expose the antenna motor and electrical housing. Disconnect the 2 plugs and remove the antenna. Instalation is the same but in reverse ;) <3