The 2002 Hyundai Elantra uses a hydraulic clutch system rather than a clutch cable. This means that the clutch is operated through a hydraulic mechanism, which provides smoother engagement and disengagement compared to a traditional cable system. If you're experiencing issues with the clutch, it may be related to the hydraulic components rather than the cable.
I have been told by Hyundai services that it would cost me $950 to replace the clutch of my 2000 Hyundai accent. I think this is a reasonable price.
To adjust the clutch on a 2002 Hyundai Elantra the fluid needs to be bled. Taking a tube and container filled partly with clutch fluid place one end to the tube on the release valve located on the slave cylinder and another in the container. Pump the clutch pedal and keep the reservoir full, this will rid the clutch lines of any air creating a stiffer pedal.
To remove the clutch pedal switch on a 2003 Hyundai Elantra, first, ensure the vehicle is in gear and the ignition is off for safety. Locate the switch mounted on the clutch pedal assembly, typically near the top of the pedal. Disconnect the electrical connector by pressing the tab and pulling it off, then remove the switch by unscrewing it or twisting it counterclockwise, depending on the design. Finally, replace it with a new switch by reversing the steps.
Fork
The clutch uses DOT 3 or 4 brake fluid, and shares the reservoir with the brake system. The brake fluid reservoir is the same as the clutch fluid reservoir.
You can find a clutch on ebay for under $200. The labor to put it in is where the real expense is...say $350-$450 Labor costs.
Take it off
The clutch fluid reservoir is on the firewall, in front of the driver, immediately to the right of the brake booster. The fluid should be clear, and at the appropriate level as indicated on the side of the reservoir.
On a 2007 Hyundai Elantra, the clutch fluid is located in the clutch master cylinder reservoir, which is typically found near the back of the engine bay, close to the driver's side. The reservoir is usually a small, translucent plastic container labeled for clutch fluid. To check or add fluid, you should ensure the vehicle is on a level surface and that the fluid level is between the "MIN" and "MAX" marks on the reservoir. Always use the recommended hydraulic fluid as specified in the owner's manual.
Yes you need to remove the subframe to remove the gearbox on elantra. the motor must be supported at the top before u remove the subframe.
your slave cylinder is leaking,need to replace.