answersLogoWhite

0

Blinkers, Reverses lights and Hazards are all wired into the same fuse. When a short occurs in one of the components all of the lights will cease to function. The fuse should be checked to see if they are in working condition.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

1991 Toyota corolla front blinkers and hazards not working but my back blinkers and hazards are working all other lights are good and working my fuses are good?

Change front light bulbs


How do you fix the reverse lights on a 1999 Hyundai Accent when all other lights and fuses work but when you shift it in reverse you get no reverse lights?

The problem is the reverse light switch. It is located on the top of the transmission that should sloved your problem.


What does it mean when the front and back blinkers and the hazards do not work on a 1992 Toyota Camry automatic 4cyl 2.2?

probably a bad emergency light flasher - NOT a turn signal FLASHER- IF the FUSES are good .


Toyota Blinkers and hazards stay on but dont blink?

The major factor is a light that is burnt out. It might be a backup light or a break light. Turn your hazards on,walk around and make sure they ALL light. If you have replaced a bulb recently, then make sure that the wattages are all correct. The system won't have enough load to cycle the flasher.Check all the bulbs to make sure they are right


What would cause Ford F-150 back up lights not to work when blinkers brakes hazards all work have already changed light bulbs and fuses?

Defective or unconnected back-up switch.


How do i install a shift light in a Hyundai accent?

Remove the shifting console cover. Remove the shifting light retaining ring. Push the light bulb in and turn at the same time. The light bulb will come out. Reverse the process install the new light bulb.


Why would a 95 Mystique automatic blow the fuse that controls blinkers heater and dash lghts when put into reverse but if shifted quickly beyond reverse into drive it doesn't blow?

One of your wires that have to do with the Reverse light are touching a another wire that they shouldent be touching ( + is touching a - ) it makes the fuse blow...if any changes made recently with any wires rewire or check if correctly wired


Brake lights hazards and blinkers aren't working The bulbs flasher and fuses all seem to be good anyone know why the lights don't seem to be working on your 1996 jeep Cherokee sport 2wd?

might have a short in the wiring to the light socket!! same happen to me...


2001 Chevy Cavalier hazards lights flash but blinkers do not work is it the turn signal bulbs that need to be replaced or the flasher?

If neither signal light works, the flasher may very likely be the problem. The hazard lights and the signal lights work off different flashers.


Vw reverse light switch?

how to change reverse light in a 00 passat


Why would blinkers on a 1986 Monte Carlo fail?

the wiring is probally defected or the light is burned out


What is a hazard light on a car?

A Hazard light on a car is nothing more then all 4 blinkers going at the same time. Hope This Helps.