because of a flasher switch, located in the fuse panel.
If the lights come on but do not flash, replace the flasher relay. If they will not come on check the fuses.
turn signals won't work. changed all the bulbs. Hazard lights work. 1999 Chrysler Sebring hardtop
Turn signal flasher?
You probably have a bad turn signal flasher (or relay, as it's called in some cars)
hazards and turn signals have separate flashers. replace flasher for turn signals
try replacing all sets of fuses for the hazard and the tail lights.
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
If your 1999 Ford Expedition has turn signals that do not work but hazard lights that do work, it is likely that you have a fuse that is blown. You might also have a wiring issue including exposed wiring.
Turn signal relay needs to be replaced. If you turn on the hazard (emergency) switch, all the signal lights should come on. This says the lights are okay.
When both of the turn signals (indicators) of a car blink simultaneously, it is usually because the hazard lights are turned on.
Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one.Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one.
They use separate flasher relays. Replace the turn signal flasher relay.