Rusted/damaged oil pan, loose drain plug. Rear main seal while driving..
closest to the driver is the highest cylinder, also everyone should have a manual for their vehicle, and the library should have a professional shop manual available in the REFERENCE section...make copies of the right sections...good luck :)
It could be a water pump.
132 lbs. right from the manual
On the bottom of the motor.
You need to turn the motor so the first piston is at top of the cylinder to remove the distributor.
A standard 5 speed manual is an AX 15.
There is a manual knob located on the bottom of the headlight door motor, the motor is right behind the grill.
the 3.0 is a 6 cylinder What are you torking? Heads, intake, exhaust, oil pan? Buy a Chiltons or Haynes manual
That will be the FRONT ( I confirmed it with the picture in my Chilton repair manual )
the correct cylinder order from left to right is 1234. looking at the distributor, it goes bottom left, cylinder 3, bottom right, cylinder 4, top right, cylinder 2, top left, cylinder 1. rotation is counter clock wise. GOOD LUCK.
It can fit if it is a manual 5speed and you swap out the v-6 bellhousing with a 22ret (22r turbo) bellhousing but good luck finding one they are hard to come by! No... only a 6 cylinder tranny will bolt to a 6 cylinder motor as same for a 4 cylinder tranny to a 4 cylinder motor but it can go in either a truck or 4runner.
MANUAL HEADLIGHT MOTOR KNOB ON MOTOR. IT SHOULD BE IN YOUR MANUAL ALSO.