Maybe you have a miss in your engine?
Gear shifter or manual transmission.
hold in the clutch
Manual transmission is a stick shift. You have to manually change the gears using the shifter and the clutch.
For an automatic transmission, check the side of the transmission by or at where the shifter linkage goes into the trans. For a manual transmission, check under the shifter boot.
The standard H transmission Standard H shifter
In a manual transmission car, the gear shifter is used to change gears by moving it into different positions. When the driver moves the gear shifter, it engages or disengages different gears in the transmission, allowing the car to shift to a higher or lower gear ratio. This helps control the speed and power of the vehicle.
A CVT is a Continuously Variable Transmission so if You see the Question It self its a bit redundant. But yes a shift Linkage or shifter is always connected to the transmission whether it is a manual Trans or an Automatic
You need the user manual which has steps on how you can replace a shifter knob on a 2002 Dodge RAM 1500 with standard transmission.
To change the shifter cable on a 1993 Plymouth Sundance with a manual transmission, start by safely lifting the vehicle and securing it on jack stands. Disconnect the old shifter cable from the shifter assembly inside the vehicle and from the transmission linkage underneath. Install the new cable by reversing the disconnection process, ensuring it is properly routed and secured. Finally, test the shifter to ensure smooth operation before lowering the vehicle.
the shifter came right out of the transmission how do i put it back in
It is very difficult to install any sort of shifter in manual transmission vehicles and should be done by a pro.
If it is just the shifter, try to remove the bolts at the top of shifter (UNDER RUBBER BOOT) to realign shift forks and free transmission.