0
A 2002 Honda RSX ABS modulator is not directly compatible with a 1996 Acura Integra due to differences in design and electronic systems. The ABS systems in these two models were developed for different generations of vehicles, and the wiring, mounting points, and hydraulic connections may differ. If you're considering such a swap, extensive modifications and wiring adaptations would likely be necessary, making it impractical. It's advisable to seek a modulator specifically designed for the 1996 Integra for optimal performance and safety.
What else can I help you with?
1993 Chevy corsica which the abs modulator valve was replaced now the abs unit just clicks and will not work how do you reinstall the abs motor pack to the abs modulator valve?
thats easy you just ....... get a life thats easy you just ....... get a life
Will 2000 integra headlights fit on a 1994 integra?
Yes they will fit however you need a 98 or newer front bumper for that to work which then would include new turn signals, if I recall correctly you may need to remove the ABS if the car your working on is a 94 or 95 since they had larger ABS modules.
Does a 1994 acura integra have rear abs?
No, it does not have ABS front or rear.
Does a 1990 Acura Integra have anti-lock breaks?
Yes that year integra is equiped with ABS
Does a 1990 Acura Integra have anti lock breaks?
Yes that year integra is equiped with ABS
ABS and handbrake light stay on permanently. Is this a damaged ECU or what?
My dealer says the ABS modulator is bad. He is ordering this $1100 part and it should fix the problems. Fortunately it is under warrenty. Without the fix, the ABS will not work.
How to find abs relay 1996 s10 pickup?
The ABS pump motor relay is not serviceable. It is part of the ABS modulator valve.
What abs component receives input signals and determines hydraulic modulator action?
The ABS Control Module.
How do you unplug the ABS modulator on a 1994 Nissan 300ZX?
To unplug the ABS modulator on a 1994 Nissan 300ZX, first, ensure the vehicle is safely raised and secured. Locate the ABS modulator, which is typically found near the brake master cylinder. Carefully disconnect the electrical connector by pressing the release tab and pulling it away from the modulator without damaging the wiring. Always consult the vehicle's service manual for specific instructions and safety precautions.
What could be the cause when a Honda civic abs light stays on?
HAVE A MECHANIC SCAN YOUR ABS SYSTEM THROUGH THE ECM. IT IS MOST LIKELY A FAULTY WHEEL SPEED SENSOR OR MAY BE THE ABS HYDRAULIC MODULATOR ITSELF. HAVE A MECHANIC SCAN YOUR ABS SYSTEM THROUGH THE ECM. IT IS MOST LIKELY A FAULTY WHEEL SPEED SENSOR OR MAY BE THE ABS HYDRAULIC MODULATOR ITSELF.
What would cause the abs light on the dash to stay on all the time on a 1999 ford f150?
The ABS computer has detected a fault in the Antilock Braking System. Often it is a wheel speed detector or a modulator.
What would cause brake fluid to transfer from the master cylinder to the ABS during normal use On a 1989 Acura Legend?
the abs modulator has a proportioning valve inside for normal braking.its an internal leak
