0
What else can I help you with?
Whats the best battery for the 1996 Nissan Primera SI?
Medium-heavy duty battery.
Why does your Renault kangoo immobilizer light keeps flashing and will not start?
The key is faulty or the immobilizer will not accept the code. remove the battery for 30 mins to allow the system to reset.
How do you disconnect the immobilizer from the battery on a 1996 vauxhall astra?
i have problems with mine from time to time, and the only way i have been able to get round it ... is to disconnect the battery. one terminal, this stops the charge going throught to the immobilizer and once reconnected it resets.
How do you reset a viper immobilizer?
To reset a viper immobilizer, disconnect the negative terminal which is connected to the battery and keep it disconnected. After several minutes, reconnect the system and your system should reset.
How do you change immobilizer on 1999 holden astra?
To change the immobilizer on a 1999 Holden Astra, you'll need to first disconnect the car battery to ensure safety. Remove the dashboard or trim pieces to access the immobilizer unit, typically located near the ignition switch or under the steering column. Disconnect the wiring harness from the old immobilizer and replace it with the new unit, ensuring all connections are secure. Finally, reassemble the dashboard and reconnect the battery, then test the new immobilizer to ensure it functions properly.
I replaced my battery and now my jeep won't start?
if its a modern jeep it probably needs to have its immobilizer reset after changing the battery ask a main dealer
How do you find the starter motor in your 1990 Nissan primera?
Should be at the lower end of the engine follow the + battery cable
Is it safe to leave the car with the battery if it is dead?
Yes, it shouldn't be any different from leaving your cellphone with a discharged battery in it. If you have an immobilizer or alarm, it may require resetting once the battery has been charged.
How do you reset the engine immobilizer after changing the key fob battery on a rover 114?
To reset the engine immobilizer on a Rover 114 after changing the key fob battery, first, ensure the new battery is installed correctly. Then, insert the key into the ignition and turn it to the "ON" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off, then turn the key to the "OFF" position. Finally, try starting the engine; this should reset the immobilizer.
Is your jaguar x-type immobilised because you changed the battery?
Yes, changing the battery in a Jaguar X-Type can sometimes lead to immobilization if the new battery isn't properly registered with the vehicle's electronic systems. This can trigger the immobilizer, preventing the car from starting. It's recommended to check the owner's manual or consult a professional to ensure the battery change was completed correctly and to reset the immobilizer if necessary.
GMC sonoma will not turn over?
Check your battery, neutral/park switch, brake switch (if part of immobilizer).
Peugeot 306d non starter how to disconect imobaliser?
You need to start the car and then disconnect the immobilizer while its running, if its the same as mine the buttons for the immobilizer will be beneath the ashtray? The plastic thing that the buttons are on lifts up and you can disconnect it from underneath by removing the plug. If your having problems with the code for the immobilizer try disconnecting the battery then re connecting it and it should reset the immobilizer code to either 0000 or 1111, start the car then disconnect the immobilizer as above.
