0
What else can I help you with?
Turn signals wont flash but hazards do?
replace turn signal flasher, hazard flasher is separate
Why do hazards work but turn signals don't?
For most vehicles the hazards and signals are two separate circuits, they have separate fuses and separate flashers. Check your signal light fuse and signal light flasher.
Does a Mazda 323 have separate flasher units for hazards and turn signals?
I saw in other places that yes it does have separate flashers.
Why does your hazard lights work and your turn signal light not work?
Two separate circuits in most vehicles. You have a fuse and a flasher for the hazards and you have a separate fuse and flasher for the signals.
95 caprice the turn signals don't work but hazards do?
2 separate circuits, separate fuses and separate flasher relays. Check the fuse, if okay then replace the signal flasher relay.
Will the turn signals work without the hazards flasher in on a 1997 Chevy S-10?
Yes, they are 2 separate systems with separate flashers.
Why would your hazard lights work but both turn signals do not work on a Chevy s10 pickup?
hazards and turn signals have separate flashers. replace flasher for turn signals
Why won't my turn signals come on at all on my 1993 Cadillac Allante but my hazards still work?
Turn signals and hazards are two separate curuits. Check/replace your signal light fuse and flasher.
Where is the function flasher in a car?
It makes the signals and the hazards flash.
What is the problem if the turn signals work but the hazards do not?
Often, a separate flasher unit is used to activate the hazard flashers. This unit might be bad, or the switch to activate the hazard flashers might be bad. answer always there are 2 flashers.one for turn signals other for hazard replace hazard flasher They have separate fuses also.
What to do when turn signals and hazards don't work?
Check the fuses and the flasher unit.
Ford f 250 Hazard lights work but turn signals do not?
Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher you need to replace the blinker flasher unit it is different from the hazard unit they cost about 4 bucks the flasher unit is the big round thing in the fuse panel in the dashboard
