0
A difficult procedure to do in your driveway. It involves pumping ATF up into the transmission through the center plug opening in the drain plug. The small center plug is a Torx head, (number 30 (I think). The vehicle needs to be level and warmed up. If you remove the center plug in the drain plug ATF should be just dripping out if the trans is full and running at operating temp. So you basically have to over fill the trans by pumping ATF up into the center plug then with engine running, allow the ATF to drain back out until it just drips out. The center plug has an extended tube that goes up inside the trans. This tube determines the fluid level with car level, running and warmed up.
What else can I help you with?
How do you add transmission fluid on 2004 ford explorer?
as far as I know you can not add fluid because the trans. is a self enclosed trans.(if you have slippage, its time for repair.
Where do you add trans fluid on a 2003 grand am is it the red cap on the top of the trans on the drivers side?
Yes.
How do you change transmission fluid on a 2003 ford expedition?
Need to remove a quart of trans. fluid to add a quart of lucas trans conditioner. Does not have a drain plug.
How much trans fluid do you add to 2000 ford focus?
how much trans fluid do i add when changing trans fliud in my 2000 focus
Were do you add trans fluid on 98 explorer auto?
On a 1998 Ford Explorer : The automatic transmission fluid dipstick is located near the firewall , on the passenger side of the engine , in the engine compartment Pull out the dipstick and use a funnel to add transmission fluid ( the type used should be engraved into the dipstick )
Where is the transmission fluid for the Honda rancher es?
the engine oil and trans oil is all in one!
Where do you add Trans Fluid in a 1995 Ford explorer?
On a 1995 Ford Explorer ( automatic transmission ) You use a funnel and add transmission fluid through the dipstick tube ( it is located in the engine compartment , by the firewall , towards the passenger side of the vehicle , where the transmission is bolted to the rear of the engine )
Where do you put transmission fluid into a 2003 ford explorer?
The very same place you check the fluid level. You will need to purchase a funnel used to add fluid to an A/T.
How do you add trans fluid 2003 ford explore?
To add transmission fluid to a 2003 Ford Explorer, first ensure the vehicle is on level ground and the engine is running. Locate the transmission dipstick, usually found near the back of the engine compartment. Remove the dipstick, wipe it clean, insert it back, and then pull it out again to check the fluid level. If low, use a funnel to add the appropriate type of transmission fluid through the dipstick tube, checking the level periodically until it reaches the correct mark.
How do you add trans fluid on a jaguar?
you cant
Where to pour transmission fluid in a 2000 dodge caravan?
You add trans fluid down the trans dipstick tube.
Where do you add transmission fluid to a 2003 ford explorer?
To add transmission fluid to a 2003 Ford Explorer, locate the transmission dipstick, which is usually found near the back of the engine bay. Pull out the dipstick, wipe it clean, and reinsert it to check the fluid level. To add fluid, use a funnel to pour the appropriate type of transmission fluid into the dipstick tube until the correct level is reached. Ensure the vehicle is on a level surface and that the engine is running while checking the fluid level.
