You will need to remove the front tire and wheels from your 2002 Jeep liberty. Remove the brake pads and break assembly. Tap the rotors with a hammer or mallet. The rotors will come off. Reverse the process to install the new rotors.
can you cut the rotors on a 2002 acura
2003 Nissan xterra supercharged replace front rotors
Same way as the front. First remove the calipers, then remove the two cross-point screws that hold the caliper in place . finally, remove the rotors and replace.
4 " x 6" speaker
Remove wheelsRemove caliper mounting boltsSlide caliper off rotorRotor should peel off hub assembly
Get new front brake rotors, there cheap.
To remove the rear brake rotors on a 2002 Diesel Excursion, first, ensure the vehicle is securely lifted and supported on jack stands. Remove the rear wheel and tire, then locate the caliper; unbolt it and slide it off the rotor. Next, remove the caliper bracket by unscrewing its bolts, then you can pull the rotor off the hub. If the rotor is stuck, gently tap it with a rubber mallet to dislodge it.
Removing Front & Rear Rotors Well Guys... I remove my Front & Rear Rotors out of my 1998 Ford Expedition XLT. I rented a 3 Jaw Puller from Auto Zone and a bottle of PB Blaster and a sledge hammer it only took about one hour or less to take both off... The way I removed the Front & Rear Rotors was ... 1. I put lots of PB Blaster in the back and the front of the rotors to be removed. 2. I put plenty of tension with the 3 Jaw Puller... 3. I hit the back of the rotor with the sledge hammer... And it came right off... Hope this helps someone out there...
There is no definite answer to this question, as no one drives the same. However you could average 30,000 miles for the front rotors, and 60,000 for the rear.
Probably scoured or warped rotors.
Different part numbers.