To fix tappet noise on a Peugeot Partner van, start by checking the engine oil level and quality, as low or dirty oil can cause insufficient lubrication. If the oil is fine, inspect the valve clearance and adjust it if necessary, as incorrect clearance can lead to noise. Additionally, consider replacing worn tappets or lifters, as they may not be functioning properly. If the noise persists, consulting a mechanic for a thorough diagnosis may be necessary.
Depends on the noise... A loud tick tick noise is usually tappet adjustment. Easy to fix. After that it gets expensive since you need to pull the head off. Can be worn guide, but that is rarely 1. Can be burnt valve. Can be pitted camshaft; unlikely.
You will have to determine the source of the noise before you can fix it.
You might have problem with thermostat which you should fix, or it is a fuse. You should go to mechanic for a check.
You have to pin-point the source of the noise and then you can determine what steps to take to fix it.
New CV joints will fix the grinding noise
You need to locate the source of the noise to determine why then we can help you fix it.
The crank noise in your car could be caused by issues with the engine, such as worn bearings or a faulty crankshaft. To fix it, you should have a mechanic inspect and repair the engine components causing the noise.
sell it
throw out bearing
Spray hairspray on the belt if it is making the noise or replace the belt or the pulley if its making the noise.
why does my heating not work in peugeot partner van year 2000?
It can be a defective CVC-joint or other things. Have it inspected by a qualified mechanic and they will find the cause of the popping noise.