0
What else can I help you with?
How do you remove the front struts?
RemovalDisconnect the battery negative cable.Loosen the four strut mounting bolts in the engine compartment several turns. Do not remove yet.Place the vehicle on jack stands.Remove the front wheels.Remove the brake line from the clip on the front strut.At the bottom of the strut, there are two bolts which attach the front strut to the spindle assembly. The top bolt is an eccentric bolt which provides for adjustment of the wheel camber. Using a paint pen, scribe, or brightly colored nail polish, mark the orientation of the eccentric bolt to the strut.Remove the eccentric bolt and bottom retaining bolt from the bottom of the strut.Pull the strut away from the spindle until it is free from the bottom of the assembly.Hold the strut while removing the four mounting bolts at the top of the strut. Remove strut from the vehicle.If the strut is to be replaced, note the orientation of the eccentric bolt alignment mark from Step six and transfer that mark to the new strut
How do you change front lower control arm bushings on a 94 ford thunderbird?
You'll need a balljoint press . Seperate lower balljoint and bottom strut mounting bolt also the bolt holding it to the frame then press out old and press in new one
How do you replace struts on 1993 mercury villager?
Compress the shock spring with a spring compressor. Remove the top strut bolt. Remove the bottom strut bolt. Reverse the process to install the new struts.
Replace struts on 2003 town and country?
You will need to compress the strut spring with a spring compressor. When the strut spring is compressed remove the strut retaining bolts. There is a strut retaining bolt on the top and the bottom of the strut assembly. Reverse the process to install the new strut.
What part hold the left rear strut to the body on the 94 Geo metro?
The left rear strut on a 1994 Geo Metro is held to the body by a combination of bolts and a mounting plate. Specifically, the top of the strut is secured to the body through a strut mount that typically consists of three bolts. The bottom of the strut connects to the rear control arm with another bolt. Proper torque specifications should be followed during installation for safety and performance.
How do you replace rear shocks on 92 Toyota tercel?
remove the rear wheel, undo the bottom bolt of the strut. inside the car remove the plasic paneling in the back covering the strut mount. unscrew both nuts and pull the strut out.
Do you have to remove strut to replace lower control arm?
no you do not have to remove the strut just take the lower control arm lose.
How do I replace the crank arm on my bike?
To replace the crank arm on your bike, you will need to first remove the old crank arm by loosening the bolt that attaches it to the bottom bracket. Once the old crank arm is removed, you can then attach the new crank arm by aligning it with the bottom bracket and tightening the bolt securely. Be sure to double-check that the crank arm is properly aligned and tightened before riding your bike.
How do you change a Renault clio front strutt?
First, open the hood. Now remove the brake line support so that you can begin to get to the strut. Remove the pinch bolt that holds the strut at the bottom. Drop the sway bar that is connected to the strut. Now remove the bolts the interior bolts that support the strut. Remove the old strut and replace it with the new one.
Where is a pinch bolt on a strut ford 2001 taurus?
It's near the base of the strut on the inside
How do you replace right front shock on 1997 Toyota Previa?
Pretty tricky. But you need to buy the manual. It is all there. The thing to consider is that the shock is actually a strut. The strut assembly includes the spring. You have to remove the entire strut assy to replace the strut. To remove the strut assy, first the tire has to come out. Then, disconnect the brake line, unless there is a bracket that allows you to just slide it out. Then remove the three nuts on top of the strut. The tricky part here is that access to those three nuts are tight, so you have to disconnect some ducts, access panels and brackets under the glove compartment. Once the three nuts are out, remove the bolt attaching the strut to the bottom arm. You need a heavy duty spring compressor to separate the strut from the assy.
How d o you change a strut arm bushing on a 99 saturn sl?
Saturn S series vehicles do not use a Strut arm... nor do they have a Strut arm bushing. I'm assuming your referring to the sway bar bushing in the center of the lower control arm. This bushing is not serviceable alone, the replacement of the entire lower control arm is needed if the bushing has failed.
