take a test light. ground the test light to the battery then take the test light and move it around the suspect spark plug if the plug wire or spark plug are cracked or defect the spark will go to the test light and you will see the spark. if you don't see any spark its not broken.
You can also use CheckSpark to quickly evaluate all your plugs and identify bad plugs and wires in seconds.
a broken spark plug der
no it can not start with a broken spark plug wire unless you fix it
Broken spark plug wires will keep almost any car from starting.
Why would you want to put a broken spark plug back in your lawnmower? Get a new one!
Yes. that plug will need replaced.
To remove a broken spark plug from a 1993 Volvo 850, first, ensure the engine is cool and disconnect the battery. Use a spark plug extraction tool or a left-handed drill bit to carefully drill into the center of the broken plug. Once you have created a hole, you can use an easy-out tool to grip and twist out the broken piece. If the plug is severely damaged, you may need to use a tap to clean the threads before installing a new spark plug.
Oil on the outside of the spark plug is normally a sign of a leaking valve cover gasket. Oil on the spark plug electrode, (plug must be removed to see this oil), is normally a sign of a broken or worn piston ring. A compression test will verify if a ring is worn or broken.
Could be bad spark plug, spark plug coil, mismatched spark plug wire, or loose/broken motor mounts, or problem with head gasket.
I do not understand why you want to remove the porcelain if it is broken off. Just remove & replace the spark plug which is no longer any good if the porcelain is broken.
To remove a broken spark plug from a 2005 Ram 5.7 Hemi, first, ensure the engine is cool and disconnect the battery. Use a magnet or a spark plug extractor to retrieve any remaining pieces of the plug. If the plug is stuck, carefully use a left-handed drill bit to drill into the center, which may help it break loose. Alternatively, you can use a spark plug removal tool designed for broken plugs to grip and extract the remaining plug body.
To remove a broken spark plug from a Ford F-150 Triton motor, first ensure the engine is cool and disconnect the battery. Use a spark plug extractor tool or a left-handed drill bit to carefully drill into the broken plug's center, then use an easy-out tool to extract it. If the broken piece is deeply lodged, you may need to remove the cylinder head for more access. Always ensure that any debris is cleaned out of the cylinder before replacing the spark plug.
bad spark plug wires, low battery, broken rotor in the distributor