0
What else can I help you with?
A pulley on front of motor is loose but i don't know the name of it it's right above the tension pulley?
If it does not drive anything it could be an idler pulley.
Where is the idler pulley located on a 1994 GMC Sierra?
i dont really know-but to find out just look it up on google!
Idler pulley diagram for a 2000 freightliner?
Need to know if you have a Detroit, Cat, or Cummins engine in order to answer this. As for the idler pulley itself, it's pretty simple to locate - it's the pulley which only spins, and doesn't actuate a pump, alternator, compressor, etc. Removing it is as simple as loosening the belt, unbolting it, and installing it in the opposite order.
How will you know if the idler pulley needs replaced on 1994 Mercury Grand Marguis?
Remove belt and check to see that it rotates freely and smoothly
Do you need to know what the torque would be to find out if the idler tension pulley has to be torqued when you install the serpentine belt on a 1995 Oldsmobile Cutlass Supreme?
there is not a specific torque for the idler pully. tighten it up with a ratchet and it will not loosen up
How do you know when idler pulley is bad?
Normally the idler wheel will have a bad bearing and will make a lot of grinding noise and or vibrate big time! If the bearings go out all together you will know real quick like as it will most likely burn or rip the belt off!
What are the timing belt alignment marks for a 1994 dodge spirit?
The marks are located on the Cam Shaft Pulley... should be easy to spot... make sure that you have the proper timing light, and do your reserach so that you will know exactly how to time the vehicle... putting it at TDC and linning up the Cam Shaft Pulley.
How do you change the idler pulley in a 2003 Sedona?
According to Troy Dean Potensky's Auto Parts in Issaquah, Washington, you may have to see a professional for that if you know what I am saying ;)
Why would 97 grand prix GTP make noises like it needs power steering fluid but does not the noise does not change with steering it is constant how do you know if belt tensioner or idler pulley is bad?
the pulley is bad when it stops moving
Can you bypass the AC compressor on a 2001 Ford Escort ZX2?
No, not that I know of. ZXTuner sells an AC Delete pulley that replaces the compresser with an idler pulley. I have it on two of my ZX2s and it works fine and is easy to install and no new belts are required.
Chevy Trailblazer making a whinning noise?
Probably the idler pulley or the tensioner pulley on the serpentine belt. Carefully use a little squirt bottle and spray each one with a little water. When it gets quiet you know which one to change.
Do know the size of the shorter belt on a 99 caravan with a 3.3 that bypass the ac?
There is an available bypass kit, but the belt is the same. You remove the ac compressor and install an idler pulley.
