0
pull on the edge of the horn button to remove it - then unscrew the 3 Phillips head screws that hold the inner horn assembly to the wheel ( do yourself a favor and unplug the horn under the hood before doing this or every peice of metal you touch makes the horn sound) - then remove the large nut in the middle of the steering wheel - next get a wheel puller and 2 bolts that thread into the 2 larger holes beside the steering shaft - a couple turns on the wheel puller and it comes right off
What else can I help you with?
How do you remove the steering wheel on a 1991 Jeep Cherokee without an air bag?
Pop the horn button off. Under that is the larger nut that holds the wheel in place. Afte that is removed, use a steering wheel puller to remove the wheel.
How do I remove the steering wheel of a 1987 jeep Comanche?
To remove the steering wheel of a 1987 Jeep Comanche, first disconnect the battery to avoid any electrical issues. Then, remove the horn button by gently prying it off or unscrewing it, depending on the design. Use a steering wheel puller to unscrew the central nut and pull the steering wheel off the shaft. Finally, ensure you keep track of all removed parts for reinstallation.
Do you need to remove steering wheel to replace key lock cylinder on a 1983 jeep cj7?
Yes.
How do you change ignition switch on 1981 jeep wagoneer?
you must remove the steering wheel and turn signal from column. then you can acces the screw to remove the switch.
Where is the steering column in a 1993 jeep?
The steering column is the part the steering wheel sits on.
After you remove the steering wheel from a 94 Jeep Wrangler how do remove the alignment plate underneath it?
Look at the other question about the 95 yj, it's explained there... lataaaaaaaaa
2005 Jeep Liberty fuse box?
driver side on left side of dash/steering wheel - remove panel on side
How do you activate heated steering wheel?
Press a button with an icon of a steering wheel with heat waves rising from it. Google "jeep heated steering wheel button" for a photo of same.
How do you remove the ignition switch key lock on a 1988 Jeep Cherokee?
Remove steering wheel, turn signal (4 screws), and torx holding ignition, reverse to reinstall.
How do you remove the ignition in an 84 Jeep grand wagoneer in order to replace lost keys?
You must remove the steering wheel. There are some special tool that make this much easier.
How do you replace the ignition switch on a 1989 Jeep Waggoner?
you have to remove the steering wheel and the turn signal. this requires special tools that can be purchased or rented cheaply.
Where is the horn located on a 1987 Jeep wagoneer limited?
On the steering wheel
