To replace the CV joint on a 1991 Subaru, first, safely elevate the vehicle and remove the wheel. Then, disconnect the axle nut and remove any retaining bolts that secure the CV joint to the transmission or hub. Pull the axle out, and replace the CV joint by removing the old boot and joint, then installing the new joint and boot, ensuring everything is secured properly. Finally, reassemble the axle, reinstall it in the vehicle, and torque all fasteners to the manufacturer's specifications.
how do you replace the drivers side drive shaft and cv joint?
how to replace a iner left hand cv joint on a 1992 for telstar
Usually the entire axle is replaced rather than trying to repair the CV joint.
how do you replace a CV joint on a 1992 Chevy pickup?
It is fairly simple, easier on a manual transmission. If you search for subaru forums, a lot of them have do it yourself write ups, with pictures even!
don't replace the joint. replace the axle
Replace the complete halfshaft assembly, it is much easier than trying to replace the cv joint itself.
Here is the link to ehow on how to remove the CV joint on a 1991 Prizm. http://www.ehow.com/how_7906772_replace-geo-metro-cv-joints.html
The CV joint in a 2000 Kia Sportage can be replace by roving the tires, axle nuts, and the knuckle bolts on the struts. Next, the CV joint can be removed by placing a screwdriver between the transmission and the CV joint will pop out.
It does have CV joints but, it is best to just swap out the complete axle assembly than to replace only the CV joint. You will spend much time and almost as much money trying to replace the CV joint than to just purchase a reconditioned axle assembly and swap it.
How much does it cost to replace a cv joint on 4 wheel drive
Lift the vehicle using a jack. Inspect the CV boot for problems. Mark the axle. Separate the CV from the shaft. Remove the CV boot clamps. Use a mallet to knock the CV joint off the shaft. Remove the boot from the CV axle shaft.