With the key switched to the "On" position, but the engine off, press the mileage indicator till total miles are shown (ie. Not on trip A or B), and then press and hold that same button. You will see a bars go up as it resets, once it's done, you're good to go.
How do i reset a service engine light on a 2005 gmc c6500 cat engine
it simply means it's time for an oil change.
t's not a problem, it is merely a reminder light so customers will be prompted to do the required maintenance. Turn the ignition ON Make sure the "ODO" is displayed, not "TRIP" Press and hold the TRIP reset button Turn the key off and back on Hold the reset button until the lines on the ODO display disappear and the ODOMETER reading comes back. answered by Liselle
To reset the maintenance required light on a 2005 Toyota Corolla, turn the ignition switch to the "OFF" position. Press and hold the trip meter reset button on the dashboard while turning the ignition switch to the "ON" position (without starting the engine). Continue to hold the button until the maintenance light blinks and then goes out. Release the button, and the light should be reset.
To reset the maintenance light on a 2005 Toyota Avalon, start by turning the ignition key to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off, and when you turn it back on, the maintenance light should be reset. If it doesn't turn off, repeat the process.
i dont know how
Usually your oil needs changing. You have to reset the light yourself. Look in manual it will show how to reset it.
Two reset the maintenance required light on a 2005 Honda Accord all you have to do is hold the odometer reset button on the gage panel for about 30 seconds while the key is in the on position. Not running just in the on position. it will reset.
To reset the maintenance required light on a 2005 Honda Accord Hybrid, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, the maintenance light should turn off. If it doesn’t, repeat the process to ensure it was done correctly.
To reset the maintenance service indicator on a 2005 Mercedes SLK 350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine; the maintenance light should be reset. If the light remains, repeat the process.
To reset the maintenance light in a 2005 Honda Element, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off. Finally, turn the ignition off and then start the engine to ensure the light has been reset.
Press and hold the odometer reset button while at the same time turning the ignition switch to on. Do not start the engine. After around 5 seconds the maintenance required light will go out.