To set the timing on a 1971 Chevrolet 454 engine, first ensure the engine is at TDC (Top Dead Center) on the compression stroke for the number one cylinder. Use a timing light and connect it to the battery and number one spark plug wire. The factory specification for initial timing is typically around 4 to 8 degrees before TDC; adjust the distributor until the timing light shows the correct degree mark on the harmonic balancer. Finally, tighten the distributor hold-down bolt and recheck the timing to ensure it hasn't moved.
The base ignition timing for a 1974 Chevy 454 engine is between 8 and 12 degrees below top dead center. A timing light is needed to accurate set ignition timing.
what are the factory timing specs for a 1977 chevy 454
Between 8 and 12 degrees before TDC... My 454 is set at 10 degrees BTDC and it runs great.
what is the ignition timing for a 1988 Chevy 454 engine
My Motorhome still has the tune-up specs. on the 454 air cleaner housing. It says to undo the vac. at the distribator and plug it. Make sure the engine is runing at 700 RPMs and set the timing at 4BTC.
To set the timing on a 1990 454 SS Chevy, first ensure the engine is at operating temperature. Then, locate the timing mark on the harmonic balancer and the timing tab. Use a timing light to check the ignition timing while the engine is running; adjust it by loosening the distributor hold-down bolt and rotating the distributor until the desired timing mark aligns with the tab. Finally, tighten the hold-down bolt and recheck the timing to ensure it remains at the correct setting.
timing for the 454 engine is 10 degree's at TDC at 700 rpm in neutral or park
8 btc , vac off distributor, in drive , prk brk. set.
A timing CHAIN
The correct timing for a Chevrolet 454 engine made in 1984 is 4 degrees before top dead center with the idle speed set at 600 Rpm's, the distributor vacuum hose disconnected and plugged, and all accessories like the A/C turned off.
#1
The Electric Company - 1971 454 4-64 was released on: USA: 16 January 1975